/technologies/internet-of-things/b/blog/posts/mspm0-opamp-interconnectionSeveral MSPM0 controllers have more than one OpAmp on board. There are MUX settings to interconnect them. I couldn&#39;t find a generic picture of how two OpAmps can be wired up, so I made one. It&#39;s based on Figure 17-8. Two OPAs in Difference Ampli...en-USTelligent Community 12https://community.element14.com/technologies/internet-of-things/b/blog/posts/mspm0-opamp-interconnectionFri, 14 Aug 2026 16:47:31 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:2543e862-7cae-4a19-8faa-b7d77ad69d6dshabaz1<p>Nice, those two op-amps look very flexible.</p> <p>It&#39;s great how the initial config is just a matter of using a graphical tool (can be local or browser-based). Screenshot below in case anyone&#39;s not seen what that looks like.</p> <p>Personally I really like how the generated code is specific to certain files that never need touching, whereas other microcontroller development environments generate code interspersed into the main code.</p> <p><img alt=" " height="438" src="/resized-image/__size/1128x876/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-2543e862-7cae-4a19-8faa-b7d77ad69d6d/nw_5F00_rAnxxdpZFh.png" width="564" /></p> <p></p> <img src="https://community.element14.com/aggbug?PostID=30048&AppID=27&AppType=Weblog&ContentType=0" width="1" height="1">