/technologies/open-source-hardware/b/blog/posts/the-audio-cable-buddy---boosting-audio-via-impedance-conversionIntroductionI&#39;ve often heard the issue that the audio isn&#39;t loud enough when people plug in their iPods/phones and so on into music systems, even if they turn the volume up to maximum on their device or the amplifier. Often the problem is down t...en-USTelligent Community 12https://community.element14.com/technologies/open-source-hardware/b/blog/posts/the-audio-cable-buddy---boosting-audio-via-impedance-conversionMon, 17 Dec 2018 09:25:06 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:d534f048-3047-4feb-b84f-9a9b05a339b5davedarko1<p>Awesome project! Could you add a schematic for this, please? Might sound stupid as the pins are all visible, but I don&#39;t really know what pin goes to what coil. Thanks</p><img src="https://community.element14.com/aggbug?PostID=5960&AppID=18&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/technologies/open-source-hardware/b/blog/posts/the-audio-cable-buddy---boosting-audio-via-impedance-conversionWed, 21 Nov 2018 01:52:34 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:d534f048-3047-4feb-b84f-9a9b05a339b5luislabmo2<p>Hi Shabaz,</p><p>&nbsp;</p><p>This is a very clever project!. Is there any spec or calculation requiered to select the right audio transformer?</p><p>&nbsp;</p><p>Luis</p><img src="https://community.element14.com/aggbug?PostID=5960&AppID=18&AppType=Weblog&ContentType=0" width="1" height="1">