/technologies/power-management/b/blog/posts/the-gan-boosterpack-series-lmg5200-evaluation-pack-and-smart-instrumentThis series of blogs describes the design of a GaN BoosterPack and its LabVIEW integration. The LMG5200 is a GaN Half Bridge that can manage 80V and 10A. This BoosterPack allows you to evaluate the performance of the device. You can change its operatien-USTelligent Community 12https://community.element14.com/technologies/power-management/b/blog/posts/the-gan-boosterpack-series-lmg5200-evaluation-pack-and-smart-instrumentSun, 10 Sep 2017 16:32:08 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:c8bf39f9-03de-4471-b905-1cec695d067cJan Cumps0<p>I&#39;m prepping to add CAN integration to the design (maybe I apply for the CAN roadtest here, not sure yet but I&#39;m interested).</p><p>I&#39;d like to be able to drive the duty cycle of the GaN half-bridge via CAN commands - and add safety measures to deal with mishaps - and report them back via CAN.</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>I have done CAN programming on the Hercules, but mostly educational - see if it works. I&#39;d like to get better at it.</p><p>As a prep, I&#39;ve been running the GaN board that I made under load. Not anything heavy, it&#39;s switching a 10V input to a 5V 2 A output.</p><p>Just enough to see that things are not overheating.</p><p>&nbsp;</p><p></p><span>[View:https://www.youtube.com/watch?v=r4VENkA06sg:440:330]</span><p></p><img src="https://community.element14.com/aggbug?PostID=2319&AppID=4&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/technologies/power-management/b/blog/posts/the-gan-boosterpack-series-lmg5200-evaluation-pack-and-smart-instrumentTue, 13 Dec 2016 19:18:29 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:c8bf39f9-03de-4471-b905-1cec695d067cDAB1<p>Nice board work.</p><p>&nbsp;</p><p>Looking forward to seeing the board in testing.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=2319&AppID=4&AppType=Weblog&ContentType=0" width="1" height="1">