PMbus Solutions from Texas Instruments : TI

randogless — Sun, 27 Oct 2013 06:44:31 GMT

Current Revision posted to Documents by randogless on 10/27/2013 6:44:31 AM

PMBus Solution

TI's unique industry-standard PMBus solution completes your design needs from input protection and control to multiphase power conversion. These PMBus-compatible products are scalable across the entire power chain, thereby accelerating design time to market and ensuring interoperability. This PMBus solution provides real-time telemetry and on-the-fly configurability - which improves system intelligence and increases system utilization.

Name & Manufacturer Part Number

Description

System Power Management and Protection I
LM25066IAPSQE/NOPB

Series:Sitara ARM Cortex-A8; Core Size:32bit; Program Memory Size:64KB; Supply Voltage Min:1.21V; Supply Voltage Max:1.326V;

Buy NowBuy Now

IC, BUCK DC-DC CONTROL, 1MHZ , VQFN-40
TPS40422RHAT

Primary Input Voltage:20V; No. of Outputs:2; Output Voltage:5.6V; Output Current:60A; No. of Pins:40;

Buy NowBuy Now

TPS40422, SYNCHRONOUS BUCK CONTROLLER, EVAL MODULE
TPS40422EVM-091

Silicon Manufacturer:Texas Instruments; Silicon Core Number:TPS40422; Kit Application Type:Power Management; Application Sub Type:Synchronous Buck Controller;

Buy NowBuy Now

IC, 16BIT MCU, MSP430, 16MHz, VQFN-32
MSP430G2553IRHB32T

Controller Family/Series:MSP430; Core Size:16bit; No. of I/O's:24; Supply Voltage Min:1.8V; Supply Voltage Max:3.6V;

Buy NowBuy Now

MSP430G2XX, LAUNCHPAD, FLASH EMULATION, DEV KIT
MSP-EXP430G2

Silicon Manufacturer:Texas Instruments; Core Architecture:MSP430; Core Sub-Architecture:MSP430; Silicon Core Number:MSP430; Silicon Family Name:MSP430G2xx;

Buy NowBuy Now

EVAL BOARD, LM25066I HOT SWAP CONTROLLER
LM25066I-EVM/NOPB

Silicon Manufacturer:Texas Instruments; Silicon Core Number:LM25066I; Kit Application Type:Power Management; Application Sub Type:Hot Swap Controller; Kit Contents:Eval Board LM25066I;

Buy NowBuy Now

Key Solution Features

Power Management and Protection IC PMBus solution — provides input protection and telemetry giving customers input power health information and configurable protection while the power supply's communication allows for configuration and monitoring.
TPS40422 — dual-output synchronous buck controller, can also be configured for a single, two-phase output. Its wide input range can support 5-V and 12-V intermediate buses. Voltage, current limit and sequencing configurable over the PMBus.
Ultra-low-power MCU for mixed signal control — offers 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs. Memory options to allow for complete PMBus stack implementations.

Tags: texas, pmbus, instruments, solutions, ti