Wishlist - What do you need for DIY Solar Energy?

srutledge — Thu, 14 Sep 2023 12:43:32 GMT

Current Revision posted to Documents by srutledge on 9/14/2023 12:43:32 PM

For the Summer of Green Technology, we're focusing on renewable energy, like solar and wind power. In this wishlist, we'll go over some of the components that you might need when putting together your own solar power system. Since there are so many different energy requirements, we won't get into any individual designs - this is more of a general list of parts you might need.

Solar Wishlist Giveaway - Ended

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light/Solar Power Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Terms:
Post your answer as a comment below between 8th May 2023 and 16th June 2023. The best answers will be chosen by the element14 community team, and you will be shipped your prize (or local equivalent) free of charge.

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Solar Battery Charging Panel

Buy now

Solar Battery Maintainer

Buy now

Monocrystalline Solar Cell with Arduino-compatible Barrel Plug

Buy now

EnOcean Indoor Solar Cell
EnOcean systems are designed to use energy harvesting to provide power for sensors and other small devices.

Buy now

Solar Harvester Development Kit
This kit gives you the tools to experiment with solar energy and the Maxim MAX20361 solar harvester IC.

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge Controller

A charge controller is necessary to regulate the flow of energy between the solar panel and the battery. It prevents overcharging and helps prolong the life of the battery. Choose a charge controller that matches the voltage of your solar panel and battery.

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino: MPPT Charge Controller

Here are some of the parts you'll need:

Arduino UNO

Buy now

Arduino Nano

Buy now

Dual MOSFET, Half Bridge

Buy now

Current Sense Amplifier
The AD8418A is a surface mount device; if you're not used to working with SMDs, the evaluation board below might make things easier.

Buy now

Evaluation Board for the AD8418 Current Sense Amplifier

Buy now

DC-DC Switching Buck, Boost, Inverting Regulator

Buy now

Inverter

If you plan to power AC appliances, you will need an inverter to convert the DC power from the battery to AC power that can be used by your appliances. Choose an inverter that matches the voltage and wattage of your battery and appliances.

Buy now

What if you want to build your own? An Internet search should yield some designs, from simple to very advanced. This link shows a simple inverter circuit; it outputs more of a square wave, but that should work for most applications! Here are some of the parts you'll need.

555 Timer

Buy now

Toroidal Transformer

Buy now

Chassis-mount Transformer

Buy now

Power MOSFET

Buy now

Photovoltaic/Solar Connectors

In addition to the components above, you'll need various items such as connectors and fuses, as well as tools for measurement.

Amphenol H4 Series

Buy now

Phoenix Contact Aries ES Series

Buy now

TE Connectivity SOLARLOK PV4-S Series

Buy now

Fuses

Phoenix Contact SUNCLIX PV Connector with Fuse Element

Buy now

Ceramic Industrial/Power Fuse

Buy now

Tools for Test and Measurement

Digital Multimeter with Bluetooth

Buy now

Solar Power/Light Meter

Buy now

Terms & Conditions

community.element14.com/.../SolarWishlistTerms.pdf

Tags: portable, diy, solar cell, battery, inverter, solar power, mppt, charge controller, summer of green technology, renewable energy, photovoltaic

Wishlist - What do you need for DIY Solar Energy?

dychen — Tue, 09 May 2023 13:01:30 GMT

Revision 18 posted to Documents by dychen on 5/9/2023 1:01:30 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light/Solar Power Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Solar Battery Charging Panel

Buy now

Solar Battery Maintainer

Buy now

Monocrystalline Solar Cell with Arduino-compatible Barrel Plug

Buy now

EnOcean Indoor Solar Cell
EnOcean systems are designed to use energy harvesting to provide power for sensors and other small devices.

Buy now

Solar Harvester Development Kit
This kit gives you the tools to experiment with solar energy and the Maxim MAX20361 solar harvester IC.

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge Controller

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino: MPPT Charge Controller

Here are some of the parts you'll need:

Arduino UNO

Buy now

Arduino Nano

Buy now

Dual MOSFET, Half Bridge

Buy now

Current Sense Amplifier
The AD8418A is a surface mount device; if you're not used to working with SMDs, the evaluation board below might make things easier.

Buy now

Evaluation Board for the AD8418 Current Sense Amplifier

Buy now

DC-DC Switching Buck, Boost, Inverting Regulator

Buy now

Inverter

Buy now

555 Timer

Buy now

Toroidal Transformer

Buy now

Chassis-mount Transformer

Buy now

Power MOSFET

Buy now

Photovoltaic/Solar Connectors

In addition to the components above, you'll need various items such as connectors and fuses, as well as tools for measurement.

Amphenol H4 Series

Buy now

Phoenix Contact Aries ES Series

Buy now

TE Connectivity SOLARLOK PV4-S Series

Buy now

Fuses

Phoenix Contact SUNCLIX PV Connector with Fuse Element

Buy now

Ceramic Industrial/Power Fuse

Buy now

Tools for Test and Measurement

Digital Multimeter with Bluetooth

Buy now

Solar Power/Light Meter

Buy now

Terms & Conditions

community.element14.com/.../SolarWishlistTerms.pdf

Tags: portable, diy, solar cell, battery, inverter, solar power, mppt, charge controller, summer of green technology, renewable energy, photovoltaic

Wishlist - What do you need for DIY Solar Energy?

dychen — Mon, 08 May 2023 15:43:14 GMT

Revision 16 posted to Documents by dychen on 5/8/2023 3:43:14 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light/Solar Power Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Terms:
Post your answer as a comment below between 12th May 2023 and 16th June 2023. The best answers will be chosen by the element14 community team, and you will be shipped your prize (or local equivalent) free of charge.

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Solar Battery Charging Panel

Buy now

Solar Battery Maintainer

Buy now

Monocrystalline Solar Cell with Arduino-compatible Barrel Plug

Buy now

EnOcean Indoor Solar Cell
EnOcean systems are designed to use energy harvesting to provide power for sensors and other small devices.

Buy now

Solar Harvester Development Kit
This kit gives you the tools to experiment with solar energy and the Maxim MAX20361 solar harvester IC.

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge Controller

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino: MPPT Charge Controller

Here are some of the parts you'll need:

Arduino UNO

Buy now

Arduino Nano

Buy now

Dual MOSFET, Half Bridge

Buy now

Current Sense Amplifier
The AD8418A is a surface mount device; if you're not used to working with SMDs, the evaluation board below might make things easier.

Buy now

Evaluation Board for the AD8418 Current Sense Amplifier

Buy now

DC-DC Switching Buck, Boost, Inverting Regulator

Buy now

Inverter

Buy now

555 Timer

Buy now

Toroidal Transformer

Buy now

Chassis-mount Transformer

Buy now

Power MOSFET

Buy now

Photovoltaic/Solar Connectors

In addition to the components above, you'll need various items such as connectors and fuses, as well as tools for measurement.

Amphenol H4 Series

Buy now

Phoenix Contact Aries ES Series

Buy now

TE Connectivity SOLARLOK PV4-S Series

Buy now

Fuses

Phoenix Contact SUNCLIX PV Connector with Fuse Element

Buy now

Ceramic Industrial/Power Fuse

Buy now

Tools for Test and Measurement

Digital Multimeter with Bluetooth

Buy now

Solar Power/Light Meter

Buy now

Terms & Conditions

community.element14.com/.../SolarWishlistTerms.pdf

Tags: portable, diy, solar cell, battery, inverter, solar power, mppt, charge controller, summer of green technology, renewable energy, photovoltaic

Wishlist - What do you need for DIY Solar Energy?

dychen — Mon, 08 May 2023 15:43:14 GMT

Revision 17 posted to Documents by dychen on 5/8/2023 3:43:14 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light/Solar Power Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Solar Battery Charging Panel

Buy now

Solar Battery Maintainer

Buy now

Monocrystalline Solar Cell with Arduino-compatible Barrel Plug

Buy now

EnOcean Indoor Solar Cell
EnOcean systems are designed to use energy harvesting to provide power for sensors and other small devices.

Buy now

Solar Harvester Development Kit
This kit gives you the tools to experiment with solar energy and the Maxim MAX20361 solar harvester IC.

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge Controller

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino: MPPT Charge Controller

Here are some of the parts you'll need:

Arduino UNO

Buy now

Arduino Nano

Buy now

Dual MOSFET, Half Bridge

Buy now

Current Sense Amplifier
The AD8418A is a surface mount device; if you're not used to working with SMDs, the evaluation board below might make things easier.

Buy now

Evaluation Board for the AD8418 Current Sense Amplifier

Buy now

DC-DC Switching Buck, Boost, Inverting Regulator

Buy now

Inverter

Buy now

555 Timer

Buy now

Toroidal Transformer

Buy now

Chassis-mount Transformer

Buy now

Power MOSFET

Buy now

Photovoltaic/Solar Connectors

In addition to the components above, you'll need various items such as connectors and fuses, as well as tools for measurement.

Amphenol H4 Series

Buy now

Phoenix Contact Aries ES Series

Buy now

TE Connectivity SOLARLOK PV4-S Series

Buy now

Fuses

Phoenix Contact SUNCLIX PV Connector with Fuse Element

Buy now

Ceramic Industrial/Power Fuse

Buy now

Tools for Test and Measurement

Digital Multimeter with Bluetooth

Buy now

Solar Power/Light Meter

Buy now

Terms & Conditions

community.element14.com/.../SolarWishlistTerms.pdf

Tags: portable, diy, solar cell, battery, inverter, solar power, mppt, charge controller, summer of green technology, renewable energy, photovoltaic

Wishlist - What do you need for DIY Solar Energy?

dychen — Fri, 05 May 2023 19:17:30 GMT

Revision 15 posted to Documents by dychen on 5/5/2023 7:17:30 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light/Solar Power Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Solar Battery Charging Panel

Buy now

Solar Battery Maintainer

Buy now

Monocrystalline Solar Cell with Arduino-compatible Barrel Plug

Buy now

EnOcean Indoor Solar Cell
EnOcean systems are designed to use energy harvesting to provide power for sensors and other small devices.

Buy now

Solar Harvester Development Kit
This kit gives you the tools to experiment with solar energy and the Maxim MAX20361 solar harvester IC.

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge Controller

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino: MPPT Charge Controller

Here are some of the parts you'll need:

Arduino UNO

Buy now

Arduino Nano

Buy now

Dual MOSFET, Half Bridge

Buy now

Current Sense Amplifier
The AD8418A is a surface mount device; if you're not used to working with SMDs, the evaluation board below might make things easier.

Buy now

Evaluation Board for the AD8418 Current Sense Amplifier

Buy now

DC-DC Switching Buck, Boost, Inverting Regulator

Buy now

Inverter

Buy now

555 Timer

Buy now

Toroidal Transformer

Buy now

Chassis-mount Transformer

Buy now

Power MOSFET

Buy now

Photovoltaic/Solar Connectors

In addition to the components above, you'll need various items such as connectors and fuses, as well as tools for measurement.

Amphenol H4 Series

Buy now

Phoenix Contact Aries ES Series

Buy now

TE Connectivity SOLARLOK PV4-S Series

Buy now

Fuses

Phoenix Contact SUNCLIX PV Connector with Fuse Element

Buy now

Ceramic Industrial/Power Fuse

Buy now

Tools for Test and Measurement

Digital Multimeter with Bluetooth

Buy now

Solar Power/Light Meter

Buy now

Terms & Conditions

Tags: portable, diy, solar cell, battery, inverter, solar power, mppt, charge controller, summer of green technology, renewable energy, photovoltaic

Wishlist - What do you need for DIY Solar Energy?

dychen — Fri, 05 May 2023 15:31:49 GMT

Revision 14 posted to Documents by dychen on 5/5/2023 3:31:49 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light/Solar Power Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Solar Battery Charging Panel

Buy now

Solar Battery Maintainer

Buy now

Monocrystalline Solar Cell with Arduino-compatible Barrel Plug

Buy now

EnOcean Indoor Solar Cell
EnOcean systems are designed to use energy harvesting to provide power for sensors and other small devices.

Buy now

Solar Harvester Development Kit
This kit gives you the tools to experiment with solar energy and the Maxim MAX20361 solar harvester IC.

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge Controller

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino: MPPT Charge Controller

Here are some of the parts you'll need:

Arduino UNO

Buy now

Arduino Nano

Buy now

Dual MOSFET, Half Bridge

Buy now

Current Sense Amplifier
The AD8418A is a surface mount device; if you're not used to working with SMDs, the evaluation board below might make things easier.

Buy now

Evaluation Board for the AD8418 Current Sense Amplifier

Buy now

DC-DC Switching Buck, Boost, Inverting Regulator

Buy now

Inverter

Buy now

555 Timer

Buy now

Toroidal Transformer

Buy now

Chassis-mount Transformer

Buy now

Power MOSFET

Buy now

Photovoltaic/Solar Connectors

Amphenol H4 Series

Buy now

Phoenix Contact Aries ES Series

Buy now

TE Connectivity SOLARLOK PV4-S Series

Buy now

Fuses

Phoenix Contact SUNCLIX PV Connector with Fuse Element

Buy now

Ceramic Industrial/Power Fuse

Buy now

Tools for Test and Measurement

Digital Multimeter with Bluetooth

Buy now

Solar Power/Light Meter

Buy now

Terms & Conditions

Tags: portable, diy, solar cell, battery, inverter, solar power, mppt, charge controller, summer of green technology, renewable energy, photovoltaic

Wishlist - What do you need for DIY Solar Energy?

dychen — Fri, 05 May 2023 15:25:02 GMT

Revision 13 posted to Documents by dychen on 5/5/2023 3:25:02 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light/Solar Power Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Terms:
Post your answer as a comment below between 15th May 2023 and 15th June 2023. The best answers will be chosen by the element14 community team, and you will be shipped your prize (or local equivalent) free of charge.

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Solar Battery Charging Panel

Buy now

Solar Battery Maintainer

Buy now

Monocrystalline Solar Cell with Arduino-compatible Barrel Plug

Buy now

EnOcean Indoor Solar Cell
EnOcean systems are designed to use energy harvesting to provide power for sensors and other small devices.

Buy now

Solar Harvester Development Kit
This kit gives you the tools to experiment with solar energy and the Maxim MAX20361 solar harvester IC.

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge Controller

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino: MPPT Charge Controller

Here are some of the parts you'll need:

Arduino UNO

Buy now

Arduino Nano

Buy now

Dual MOSFET, Half Bridge

Buy now

Current Sense Amplifier
The AD8418A is a surface mount device; if you're not used to working with SMDs, the evaluation board below might make things easier.

Buy now

Evaluation Board for the AD8418 Current Sense Amplifier

Buy now

DC-DC Switching Buck, Boost, Inverting Regulator

Buy now

Inverter

Buy now

555 Timer

Buy now

Toroidal Transformer

Buy now

Chassis-mount Transformer

Buy now

Power MOSFET

Buy now

Photovoltaic/Solar Connectors

Amphenol H4 Series

Buy now

Phoenix Contact Aries ES Series

Buy now

TE Connectivity SOLARLOK PV4-S Series

Buy now

Fuses

Phoenix Contact SUNCLIX PV Connector with Fuse Element

Buy now

Ceramic Industrial/Power Fuse

Buy now

Tools for Test and Measurement

Digital Multimeter with Bluetooth

Buy now

Solar Power/Light Meter

Buy now

Terms & Conditions

Tags: portable, diy, solar cell, battery, inverter, solar power, mppt, charge controller, summer of green technology, renewable energy, photovoltaic

Wishlist - What do you need for DIY Solar Energy?

dychen — Fri, 05 May 2023 15:19:34 GMT

Revision 12 posted to Documents by dychen on 5/5/2023 3:19:34 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light/Solar Power Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Solar Battery Charging Panel

Buy now

Solar Battery Maintainer

Buy now

Monocrystalline Solar Cell with Arduino-compatible Barrel Plug

Buy now

EnOcean Indoor Solar Cell
EnOcean systems are designed to use energy harvesting to provide power for sensors and other small devices.

Buy now

Solar Harvester Development Kit
This kit gives you the tools to experiment with solar energy and the Maxim MAX20361 solar harvester IC.

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge Controller

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino: MPPT Charge Controller

Here are some of the parts you'll need:

Arduino UNO

Buy now

Arduino Nano

Buy now

Dual MOSFET, Half Bridge

Buy now

Current Sense Amplifier
The AD8418A is a surface mount device; if you're not used to working with SMDs, the evaluation board below might make things easier.

Buy now

Evaluation Board for the AD8418 Current Sense Amplifier

Buy now

DC-DC Switching Buck, Boost, Inverting Regulator

Buy now

Inverter

Buy now

555 Timer

Buy now

Toroidal Transformer

Buy now

Chassis-mount Transformer

Buy now

Power MOSFET

Buy now

Photovoltaic/Solar Connectors

Amphenol H4 Series

Buy now

Phoenix Contact Aries ES Series

Buy now

TE Connectivity SOLARLOK PV4-S Series

Buy now

Fuses

Phoenix Contact SUNCLIX PV Connector with Fuse Element

Buy now

Ceramic Industrial/Power Fuse

Buy now

Tools for Test and Measurement

Digital Multimeter with Bluetooth

Buy now

Solar Power/Light Meter

Buy now

Terms & Conditions

Wishlist - What do you need for DIY Solar Energy?

dychen — Fri, 05 May 2023 15:18:40 GMT

Revision 11 posted to Documents by dychen on 5/5/2023 3:18:40 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Solar Battery Charging Panel

Buy now

Solar Battery Maintainer

Buy now

Monocrystalline Solar Cell with Arduino-compatible Barrel Plug

Buy now

EnOcean Indoor Solar Cell
EnOcean systems are designed to use energy harvesting to provide power for sensors and other small devices.

Buy now

Solar Harvester Development Kit
This kit gives you the tools to experiment with solar energy and the Maxim MAX20361 solar harvester IC.

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge Controller

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino: MPPT Charge Controller

Here are some of the parts you'll need:

Arduino UNO

Buy now

Arduino Nano

Buy now

Dual MOSFET, Half Bridge

Buy now

Current Sense Amplifier
The AD8418A is a surface mount device; if you're not used to working with SMDs, the evaluation board below might make things easier.

Buy now

Evaluation Board for the AD8418 Current Sense Amplifier

Buy now

DC-DC Switching Buck, Boost, Inverting Regulator

Buy now

Inverter

Buy now

555 Timer

Buy now

Toroidal Transformer

Buy now

Chassis-mount Transformer

Buy now

Power MOSFET

Buy now

Photovoltaic/Solar Connectors

Amphenol H4 Series

Buy now

Phoenix Contact Aries ES Series

Buy now

TE Connectivity SOLARLOK PV4-S Series

Buy now

Fuses

Phoenix Contact SUNCLIX PV Connector with Fuse Element

Buy now

Ceramic Industrial/Power Fuse

Buy now

Tools for Test and Measurement

Digital Multimeter with Bluetooth

Buy now

Solar Power/Light Meter

Buy now

Terms & Conditions

Wishlist - What do you need for DIY Solar Energy?

dychen — Fri, 05 May 2023 14:56:10 GMT

Revision 10 posted to Documents by dychen on 5/5/2023 2:56:10 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge Controller

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino: MPPT Charge Controller

Here are some of the parts you'll need:

Buy now

Pro Solar

Buy now

Terms & Conditions

Wishlist - What do you need for DIY Solar Energy?

dychen — Fri, 05 May 2023 14:49:45 GMT

Revision 9 posted to Documents by dychen on 5/5/2023 2:49:45 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge Controller

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino:

MPPT Charge Controller: https://microcontrolere.wordpress.com/2016/12/16/mppt-solar-charger

Here are some of the parts you'll need:

Buy now

Inverter

Buy now

What if you want to build your own? An Internet search should yield some designs, from simple to very advanced. This site
https://www.circuitbasics.com/what-are-power-inverters/
shows a simple inverter circuit; it outputs more of a square wave, but that should work for most applications! Here are the parts you'll need:

Buy now

Photovoltaic/Solar Connectors

Buy now

Fuses

Buy now

Tools for Test and Measurement

Buy now

Pro Solar

Buy now

Terms & Conditions

Wishlist - What do you need for DIY Solar Energy?

dychen — Fri, 05 May 2023 13:38:13 GMT

Revision 8 posted to Documents by dychen on 5/5/2023 1:38:13 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge controller

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino:

MPPT Charge Controller: https://microcontrolere.wordpress.com/2016/12/16/mppt-solar-charger

Here are some of the parts you'll need:

Buy now

Inverter

Buy now

Photovoltaic/Solar Connectors

Buy now

Fuses

Buy now

Tools for Test and Measurement

Buy now

Pro Solar

Buy now

Terms & Conditions

Wishlist - What do you need for DIY Solar Energy?

dychen — Fri, 05 May 2023 13:34:49 GMT

Revision 7 posted to Documents by dychen on 5/5/2023 1:34:49 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Buy now

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Buy now

Charge controller

Buy now

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino:

MPPT Charge Controller: https://microcontrolere.wordpress.com/2016/12/16/mppt-solar-charger

Here are some of the parts you'll need:

Buy now

Inverter

Buy now

Photovoltaic/Solar Connectors

Buy now

Fuses

Buy now

Tools for Test and Measurement

Buy now

Pro Solar

Buy now

Terms & Conditions

Wishlist - What do you need for DIY Solar Energy?

dychen — Wed, 03 May 2023 20:33:58 GMT

Revision 6 posted to Documents by dychen on 5/3/2023 8:33:58 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win a Multicomp Pro - Pro Solar Light Meter.

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Charge controller

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino:

MPPT Charge Controller: https://microcontrolere.wordpress.com/2016/12/16/mppt-solar-charger

Here are some of the parts you'll need:

Inverter

Photovoltaic/Solar Connectors

Fuses

Tools for Test and Measurement

Pro Solar

Terms & Conditions

Wishlist - What do you need for DIY Solar Energy?

dychen — Wed, 03 May 2023 18:44:47 GMT

Revision 5 posted to Documents by dychen on 5/3/2023 6:44:47 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win...

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Charge controller

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino:

MPPT Charge Controller: https://microcontrolere.wordpress.com/2016/12/16/mppt-solar-charger

Here are some of the parts you'll need:

Inverter

Photovoltaic/Solar Connectors

Fuses

Tools for Test and Measurement

Pro Solar

Terms & Conditions

Wishlist - What do you need for DIY Solar Energy?

dychen — Wed, 03 May 2023 18:24:58 GMT

Revision 4 posted to Documents by dychen on 5/3/2023 6:24:58 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win...

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Charge controller

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino:

MPPT Charge Controller: https://microcontrolere.wordpress.com/2016/12/16/mppt-solar-charger

Here are some of the parts you'll need:

Inverter

Photovoltaic/Solar Connectors

Fuses

Test Tools

Multicomp Pro Pro Solar

Terms & Conditions

Wishlist - What do you need for DIY Solar Energy?

dychen — Wed, 03 May 2023 15:15:04 GMT

Revision 3 posted to Documents by dychen on 5/3/2023 3:15:04 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win...

What are some tips on integrating renewable energy into your designs?
If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Solar Cells/Panels

When selecting solar cells/panels, estimate your energy requirements and calculate how many you need - it might be a lot. For smaller projects, check out the following:

Battery

You can use a 12V lead-acid battery for a low power system, while a high power system may require multiple deep cycle batteries with a total capacity of several kilowatt-hours.

Charge controller

You can also build a charge controller; parts will vary depending on what type you want to build. Here's an example that uses an Arduino:

MPPT Charge Controller: https://microcontrolere.wordpress.com/2016/12/16/mppt-solar-charger

Here are some of the parts you'll need:

Inverter

Photovoltaic/Solar Connectors

Fuses

Test Tools

Multicomp Pro Pro Solar

Terms & Conditions

Wishlist - What do you need for DIY Solar Energy?

dychen — Wed, 03 May 2023 14:49:27 GMT

Revision 2 posted to Documents by dychen on 5/3/2023 2:49:27 PM

Solar Wishlist Giveaway

Answer the questions below for a chance to win...

What are some tips on integrating renewable energy into your designs?

If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!

Terms & Conditions

Wishlist - What do you need for DIY Solar Energy?

dychen — Wed, 03 May 2023 14:49:10 GMT

Revision 1 posted to Documents by dychen on 5/3/2023 2:49:10 PM

Solar WIshlist Giveaway

Answer the questions below for a chance to win...

What are some tips on integrating renewable energy into your designs?

If you have past projects which used renewable energy, we'd love to hear how you did it...and of course, we'd love to see some pictures!