Alternative Energy Solutions - Wind Turbine Pitch Control

Matt — Thu, 07 Oct 2021 08:51:24 GMT

Current Revision posted to Documents by Matt on 10/7/2021 8:51:24 AM

Alternative Energy Solutions - Wind Turbine Pitch Control

Wind Turbine pitch control system is usually built using a controller to employ the pitch control mechanisms and a feedback module for monitoring the output power. High performance MCUs or DSCs are often selected as the controllers of pitch control systems. They are responsible for giving instructions to pitch control mechanisms based on real-time wind speed, preset power rating, pitch information, and output power signal of generator. Pitch control mechanisms are commonly comprised of a motor and a motor driver. Each motor blade needs a single control mechanism, which means three mechanisms in total are required.

After the instructions given by controller are received, the motor drivers drive their associated motors to change blade incidence. Meanwhile, the real-time pitch information is sent back to controller. The feedback module, composed of voltage and current sensors, forms the feedback loop which feeds the voltage and current signals from the sensors back to the controller.

When wind speed is not higher than the rated speed, the blade incidence stay near the angle 0° (highest power point). This is similar to that of a generator with constant pitch, generating an output power that changes along with wind speed. At higher wind speeds, the pitch control mechanism changes blade incidence so that the output power of generator is within the allowed range.

Visit >

TEXAS INSTRUMENTS	DSC	Running an Application from Internal Flash Memory on the TMS320F28xxx DSP (Rev. I)		TMS320F28xxx	Click here
TEXAS INSTRUMENTS	DSC	EEPROM Emulation With the TMS320F28xxx DSCs		TMS320F28xxx	Click here
TEXAS INSTRUMENTS	DSC	Optimizing Code Performance and Size for Stellaris Microcontrollers			Click here
TEXAS INSTRUMENTS	DSC	Clocking options for Stellaris Family Microcontrollers			Click here
TEXAS INSTRUMENTS	DSC	Advanced Linker Techniques for Convenient and Efficient Memory Usage			Click here
TEXAS INSTRUMENTS	DSC	Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x (Rev. A)		TMS320F280x	Click here
TEXAS INSTRUMENTS	DSC	Flash Programming Solutions for the TMS320F28xxx DSCs			Click here
TEXAS INSTRUMENTS	DSC	An Overview of Designing Analog Interface With TM320F28xx/28xxx DSCs (Rev. A)		TM320F28xx	Click here
TEXAS INSTRUMENTS	DSC	Copying Compiler Sections from Flash to RAM on the TMS320F28xxx DSCs		TMS320F28xxx	Click here
TEXAS INSTRUMENTS	DSC	Configuring Source of Multiple ePWM Trip-Zone Events			Click here
TEXAS INSTRUMENTS	DSC	TMS320F281x Boot ROM Serial Flash Programming		TMS320F281x	Click here
NXP	Microcontroller	Wakeup from Deep Sleep using the CANActivity interrupt		LPC1700	Click here
NXP	Microcontroller	DSP library for LPC1700 and LPC1300		LPC1700	Click here
NXP	Microcontroller	Using the LPC1700 power modes		LPC1700	Click here
NXP	Microcontroller	FAT library EFSL and FatFs port on NXP LPC1700		LPC1700	Click here
NXP	Microcontroller	Memory to DAC data transfers using the LPC1700's DMA		LPC1700	Click here
NXP	Microcontroller	NXP LPC Cortex-M3 IEC60335 Class B library		LPC1700	Click here
NXP	Microcontroller	IEC 60601-1-8 audible alert generator using the LPC1700		LPC1700	Click here
NXP	Microcontroller	LPC1700 Ethernet MII Management (MDIO) via software		LPC1700	Click here
NXP	Microcontroller	LPC1700 RTC hardware auto calibration		LPC1700	Click here
NXP	Microcontroller	LPC1700 secondary USB bootloader		LPC1700	Click here
NXP	Microcontroller	LPC1700 timer triggered memory to GPIO data transfer		LPC1700	Click here
NXP	Microcontroller	Porting uIP1.0 to LPC1700		LPC1700	Click here
NXP	Microcontroller	Using Code Read Protection in LPC1700		LPC1700	Click here
STMICROELECTRONICS	Microcontroller	USB DFU protocol used in the STM32™ bootloader	AN3156	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	USART protocol used in the STM32™ bootloader	AN3155	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	CAN protocol used in the STM32™ bootloader	AN3154	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	STM32™’s ADC modes and their applications	AN3116	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	Communication peripheral FIFO emulation with DMA and DMA timeout in STM32F10x microcontrollers	AN3109	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	Managing the Driver Enable signal for RS-485 and IO-Link communications with the STM32™’s USART	AN3070	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	Configuring the NicheLite™ TCP/IP stack for the STM32F107xx microcontroller	AN3000	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	STM8S and STM32™ MCUs: a consistent 8/32-bit product line for painless migration	AN2945	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	Oscillator design guide for ST microcontrollers	AN2867	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	Smartcard interface with the STM32F10x microcontrollers	AN2598	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	EEPROM emulation in in STM32F10x microcontrollers	AN2594	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	STM32F10xxx hardware development: getting started	AN2586	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	STM32F10x in-application programming using the USART	AN2557	STM32F10X	Click here

Alternative Energy Solutions - Wind Turbine Pitch Control

Former Member — Thu, 07 Oct 2021 08:51:24 GMT

Revision 1 posted to Documents by Former Member on 10/7/2021 8:51:24 AM

Alternative Energy Solutions - Wind Turbine Pitch Control

contentimage_13699.jpg

Visit >

TEXAS INSTRUMENTS	DSC	Running an Application from Internal Flash Memory on the TMS320F28xxx DSP (Rev. I)		TMS320F28xxx	Click here
TEXAS INSTRUMENTS	DSC	EEPROM Emulation With the TMS320F28xxx DSCs		TMS320F28xxx	Click here
TEXAS INSTRUMENTS	DSC	Optimizing Code Performance and Size for Stellaris Microcontrollers			Click here
TEXAS INSTRUMENTS	DSC	Clocking options for Stellaris Family Microcontrollers			Click here
TEXAS INSTRUMENTS	DSC	Advanced Linker Techniques for Convenient and Efficient Memory Usage			Click here
TEXAS INSTRUMENTS	DSC	Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x (Rev. A)		TMS320F280x	Click here
TEXAS INSTRUMENTS	DSC	Flash Programming Solutions for the TMS320F28xxx DSCs			Click here
TEXAS INSTRUMENTS	DSC	An Overview of Designing Analog Interface With TM320F28xx/28xxx DSCs (Rev. A)		TM320F28xx	Click here
TEXAS INSTRUMENTS	DSC	Copying Compiler Sections from Flash to RAM on the TMS320F28xxx DSCs		TMS320F28xxx	Click here
TEXAS INSTRUMENTS	DSC	Configuring Source of Multiple ePWM Trip-Zone Events			Click here
TEXAS INSTRUMENTS	DSC	TMS320F281x Boot ROM Serial Flash Programming		TMS320F281x	Click here
NXP	Microcontroller	Wakeup from Deep Sleep using the CANActivity interrupt		LPC1700	Click here
NXP	Microcontroller	DSP library for LPC1700 and LPC1300		LPC1700	Click here
NXP	Microcontroller	Using the LPC1700 power modes		LPC1700	Click here
NXP	Microcontroller	FAT library EFSL and FatFs port on NXP LPC1700		LPC1700	Click here
NXP	Microcontroller	Memory to DAC data transfers using the LPC1700's DMA		LPC1700	Click here
NXP	Microcontroller	NXP LPC Cortex-M3 IEC60335 Class B library		LPC1700	Click here
NXP	Microcontroller	IEC 60601-1-8 audible alert generator using the LPC1700		LPC1700	Click here
NXP	Microcontroller	LPC1700 Ethernet MII Management (MDIO) via software		LPC1700	Click here
NXP	Microcontroller	LPC1700 RTC hardware auto calibration		LPC1700	Click here
NXP	Microcontroller	LPC1700 secondary USB bootloader		LPC1700	Click here
NXP	Microcontroller	LPC1700 timer triggered memory to GPIO data transfer		LPC1700	Click here
NXP	Microcontroller	Porting uIP1.0 to LPC1700		LPC1700	Click here
NXP	Microcontroller	Using Code Read Protection in LPC1700		LPC1700	Click here
STMICROELECTRONICS	Microcontroller	USB DFU protocol used in the STM32™ bootloader	AN3156	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	USART protocol used in the STM32™ bootloader	AN3155	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	CAN protocol used in the STM32™ bootloader	AN3154	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	STM32™’s ADC modes and their applications	AN3116	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	Communication peripheral FIFO emulation with DMA and DMA timeout in STM32F10x microcontrollers	AN3109	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	Managing the Driver Enable signal for RS-485 and IO-Link communications with the STM32™’s USART	AN3070	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	Configuring the NicheLite™ TCP/IP stack for the STM32F107xx microcontroller	AN3000	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	STM8S and STM32™ MCUs: a consistent 8/32-bit product line for painless migration	AN2945	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	Oscillator design guide for ST microcontrollers	AN2867	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	Smartcard interface with the STM32F10x microcontrollers	AN2598	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	EEPROM emulation in in STM32F10x microcontrollers	AN2594	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	STM32F10xxx hardware development: getting started	AN2586	STM32F10X	Click here
STMICROELECTRONICS	Microcontroller	STM32F10x in-application programming using the USART	AN2557	STM32F10X	Click here