STMICROELECTRONICS - STEVAL-ISV006V2 - BOARD, EVAL, SOLAR BATT CRG, 5W

Matt — Sun, 03 Jun 2012 19:38:06 GMT

Current Revision posted to Documents by Matt on 6/3/2012 7:38:06 PM

STMICROELECTRONICS - STEVAL-ISV006V2STEVAL-ISV006V2 - BOARD, EVAL, SOLAR BATT CRG, 5W | Buy Now!Buy Now!

Product Description

The STEVAL-ISV006V2 demonstration board is based on the SPV1040 high efficiency solar battery charger with embedded MPPT. The SPV1040 device is a low power, low voltage, monolithic step-up converter with an input voltage range from 0.3 V to 5.5 V, and is capable of maximizing the energy generated by even a single solar cell (or fuel cell), where low input voltage handling capability is extremely important.

Thanks to the embedded MPPT algorithm, even under varying environmental conditions (such as

irradiation, dirt, temperature) the SPV1040 offers maximum efficiency in terms of power harvested

from the cells and transferred to the output.

The device employs an input voltage regulation loop, which fixes the charging battery voltage via a resistor divider. The maximum output current is set with a current sense resistor according to charging current requirements.

The SPV1040 protects itself and other application devices by stopping the PWM switching if either

the maximum current threshold (up to 2 A) is reached or the maximum temperature limit (up to

155 °C) is exceeded.

STEVAL-ISV006V2 circuit schematic

The STEVAL-ISV006V2 demonstration board is supplied by a PV panel with PPK of 200 mW, which can be replaced with PV panels with PPK up to 5 W (VOC < 5 V) depending on application requirements.

The output load is a 220 mF, 5.5 V supercapacitor that can be replaced with lead-acid, NiCd or NiMh rechargeable batteries (max voltage = 5 and > VOC of the selected PV panel). The demonstration board provides a simple charge status indicator using 2 LEDs, and 3 trimmers are available to allow setup according to the specific application requirements.

Product Features

High-efficiency monolithic step-up DC-DC converter
Proprietary “perturb & observe” embedded MPPT algorithm
Very low input voltage (down to 0.3 V)
Integrated N-channel and P-channel MOSFETs with low RON resistance
Overcurrent and overtemperature protection
Input reverse polarity protection
LED charge status indicator
RoHS compliant

Man Part No.	Description
STEVAL-ISV006V2STEVAL-ISV006V2	BOARD, EVAL, SOLAR BATT
STEVAL-ISV005V1STEVAL-ISV005V1	BOARD, EVAL, SOLAR BATT
STEVAL-ISV008V1STEVAL-ISV008V1	BOARD, EVAL, PV CVTR, 300W
STEVAL-ISV009V1STEVAL-ISV009V1	BOARD, EVAL, PV CVTR, 300W

Tags: board, 1972607, 67t0651, 5w, 67t0652, crg, 1972610, 1972608, 59t6643, 71t5390, steval-isv009v1, steval-isv005v1, steval-isv006v2, eval, stmicroelectronics, 1972609, batt, steval-isv008v1, solar