ABB CONTROL - DL23055P99 - STARTER, DOL, 5.5KW, 230V

RenfordNel — Fri, 11 May 2012 11:06:18 GMT

Current Revision posted to Documents by RenfordNel on 5/11/2012 11:06:18 AM

ABB CONTROL - DL23055P99DL23055P99 - STARTER, DOL, 5.5KW, 230V | Buy NowBuy Now

Product Description

STARTER, DOL, 5.5KW, 230V

Supply Voltage Range: 230V AC

No. of Phases: Single or Three

Power Rating: 5.5kW

SVHC: No SVHC (20-Jun-2011)

Bell Output: No

External Depth: 127mm

External Length / Height: 230mm

External Width: 106mm

Installation

Remove cover by releasing 2 off screws with a screwdriver.

Wiring to overload:

Connect leads provided from – terminal 14 to terminal 95 and terminal A2 to terminal 96
Check operating coil voltage and frequency
Remove appropriate top/bottom knockouts. Attach conduit bushes to conduit
Mount base and connect to bushes. If continuous grounding is required fit separate bonding strap.

For on-site control circuit conversions

Connect cables and ensure that all terminals are tight.
When installed, set the hand/auto rest selector and adjust the current calibration to the desired value.
Replace cover and re-tighten cover screws.

Overload Selection

Man Part No.	Description
DL23055P99DL23055P99	STARTER, DOL, 5.5KW, 230V
DL40055P99DL40055P99	STARTER, DOL, 5.5KW, 400V
DL23075P99DL23075P99	STARTER, DOL, 7.5KW, 230V
DL40075P99DL40075P99	STARTER, DOL, 7.5KW, 400V

Tags: 77t2823, dl40055p99, 2076076, control, 5.5kw, 79t4712, 2076075, 2076073, dl40075p99, abb, 82t3075, 230v, starter, dl23055p99, dol, 82t3076, 2076074, dl23075p99