Documents

Making Apple's Newest Mac Pro aka The Monolith

bluescreen — Fri, 08 Oct 2021 07:32:31 GMT

Current Revision posted to Documents by bluescreen on 10/8/2021 7:32:31 AM

I don't know if you guys have already seen this, but the video showing the making of the newest addition to the Mac Pro line is pretty hypnotic. Enjoy!

www.youtube.com/watch

Tags: industrial

SCHURTER: IP protection of power plug connections in devices in accordance with IEC 60529

vonarbes — Fri, 08 Oct 2021 05:32:08 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:32:08 AM

Increasing requirements for higher dust or splash water impermeability require components with equal properties

In order to meet the requirements of device standards, the demands of daily use in harsh environments with dust and splash water, or cleaning, devices must in many cases offer a protection rating higher than IP 40. Components such as power plug connections in accordance with IEC 60320, switches, operation elements or display elements, wich have increased impermeability and allow the same with the device housing, facilitate the engineer while designing a corresponding device. This applies to components on the front as well as those on the back of the device.

Attachments:

community.element14.com/.../SCHURTER_5F00_IP_5F00_Protection_5F00_Pullout_5F00_Prevention.pdf

SCHURTER_IP_Protection_Pullout_Prevention.pdf

Tags: analysis, withstand, plug, sterilization, device, needed, cleasing, schurter_industrial, power, disinfection

SCHURTER: Hochleistungswerkstoff und Designobjekt Keramik

vonarbes — Fri, 08 Oct 2021 05:31:28 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:31:28 AM

Immer mehr Bauteile im Maschinen- und Anlagenbau bestehen aus Keramik. Meist arbeiten die Komponenten im Verborgenen. Doch Keramik ist nicht nur besonders widerstandsfähig, sondern auch optisch attraktiv. Der Siegeszug der Keramik geht deswegen auch dort weiter, wo Design gefragt ist. Ein Beispiel ist der Keramikschalter MSM 19 CS LE

der Schweizer Firma SCHURTER.

Attachments:

community.element14.com/.../SCHURTER_5F00_MSM_5F00_CS_5F00_Keramik.pdf

SCHURTER_MSM_CS_Keramik.pdf

Tags: mechanische_festigkeit, optisch, robust, widerstandsfähig, schlagfest, schurter_industrial, kundespezifisch, unempfindlich

SCHURTER: Sichere Netztrennung und einfache Montage

vonarbes — Fri, 08 Oct 2021 05:31:25 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:31:25 AM

IEC Gerätestecker mit Netzschalter

Die Energieeffizienz wird beim Design elektronischer Geräte immer wichtiger. Aus diesem Grund gibt es viele Bestrebungen zur Reduktion des Standby-Verbrauchs. Die konsequente Realisierung zeigt sich in der sicheren Netztrennung mittels mechanischemSchalter.

Attachments:

community.element14.com/.../SCHURTER_5F00_kompakte_5F00_Stromzufuehrung.pdf

SCHURTER_kompakte_Stromzufuehrung.pdf

Tags: hole, standby, schaltvermögen, through, Technology, schraubverbindung, schurter_industrial, bowdenzug

SCHURTER: Ihr Partner für hochwertige Eingabesysteme

vonarbes — Fri, 08 Oct 2021 05:30:45 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:30:45 AM

Der Name SCHURTER steht für Qualität, Innovation und Service. Seit über 30 Jahren entwickelt und produziert die Division Input Systems hochwertige Eingabesysteme. Wir sind erfolgreich, weil wir dem Kunden den besten Nutzen schaffen!

Attachments:

community.element14.com/.../SCHURTER_5F00_Eingabesysteme.pdf

SCHURTER_Eingabesysteme.pdf

Tags: schurter_industrial

SCHURTER: high-performance ceramic with enormous potential for design appeal

vonarbes — Fri, 08 Oct 2021 05:30:33 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:30:33 AM

Ceramic components are used increasingly in the design of equipment and machines. These components often go unnoticed, working somewhere in the background. While understated, ceramic is not only extremely rugged but also visually attractive. It stands out as the elite choice, when it comes to demand for design appeal. One example of such a component is the pushbutton ceramic switch MSM 19 CS LE made by SCHURTER.

Attachments:

community.element14.com/.../SCHURTER_5F00_MSM_5F00_CS_5F00_Ceramic.pdf

SCHURTER_MSM_CS_Ceramic.pdf

Tags: indestructibility, resistance, chemical, hardness, ip69, schurter_industrial, power_loads

SCHURTER: Technologievergleich von Touch Screen Eingabesystemen

vonarbes — Fri, 08 Oct 2021 05:30:28 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:30:28 AM

Neuartige Eingabesysteme auf Basis von Folientastaturen, kapazitiver Technologie und analog-resistiven Touch Screens für Industrieanwendungen

Die erfolgreiche Markteinführung von Apples i-Pod und i-Phone Produkten weckte auch

im Industriesektor eine große Nachfrage nach Eingabesystemen mit Sensor-Feeling und Multi-Touch-Fähigkeit der Touch Screens. Früher beschränkten sich Touch Screen Lösungen auf die Ein-Finger-Betätigung, benötigten

Folientastaturen eine Betätigungskraft zwischen 2 und 5 Newton, und Touch Screens auf Basis analog-resistiver Technologie waren nur mit kratzempfindlicher Oberfläche aus Polyester verfügbar. Das hat sich nun geändert. Innovative Bedieneinheiten mit Sensor-Feeling, kapazitive Technologien für Eingabesysteme hinter Glas sowie Multifinger-Touchsysteme und resistive Touch Screens mit Glasoberfläche alles Eingabesysteme der neuesten Generation - ermöglichen heute vollkommen neue Produktdesigns im Industriebereich.

Attachments:

community.element14.com/.../SCHURTER_5F00_Technologievergleich_5F00_Touch_5F00_Screen_5F00_Loesungen.pdf

SCHURTER_Technologievergleich_Touch_Screen_Loesungen.pdf

Tags: multi_touch, film, polyesterfolie, kapazitiv, widerstandsfähig, schurter_industrial, glas

SCHURTER: Touch Keypad - Neue Folientastatur mit "Sensor Feeling"

vonarbes — Fri, 08 Oct 2021 05:30:27 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:30:27 AM

Folientastaturen sind zuverlässige und robuste Eingabesysteme für Anwendungen im gesamten industriellen Umfeld. Weitere Einsatzgebiete mit hohen Anforderungen an die unterschiedlichsten Ausführungen von Folientastaturen finden sich auch im Lebensmittel und im Medizinbereich. Eine kontinuierliche Weiterentwicklung der Tastatur- und Fertigungstechnologien mit professioneller Qualitätssicherung ist Voraussetzung für die Herstellung eines kostengünstigen und hochwertigen Eingabesystems.

Attachments:

community.element14.com/.../SCHURTER_5F00_Touch_5F00_Keypad.pdf

SCHURTER_Touch_Keypad.pdf

Tags: hygiene, ip65, led, antippen, panel

SCHURTER: Touch Screens im industrietauglichen Design

vonarbes — Fri, 08 Oct 2021 05:30:25 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:30:25 AM

Konstruktionsaspekte - Touch Screens

Für industrielle Anwendungen ist der analog-resistive Touch Screen aufgrund seiner Funktionalität und Flexibilität das führende Eingabemedium. Analog-resistive Touch Screens besitzen im industriellen Umfeld einen Marktanteil von ca. 85%. Kapazitive Touch Systeme sind mit 10% vertreten, die restlichen 5% teilen sich die Oberflächenwellen Touch Screens und Infrarot Systeme. Aktuell sind weltweit über 50 Hersteller von analogresistiven Touch Screens auf dem Markt vertreten, neue Hersteller in China sind hierbei nicht berücksichtigt. Die Anforderungen an den anspruchsvollen Einsatz im industriellen Umfeld werden jedoch nicht von allen Touch Screen Herstellern im gleichen Umfang erfüllt. Es gibt erhebliche Unterschiede in der Qualität, d. h. der Konstruktion und der Materialauswahl und der damit verbundenen Langzeitstabilität der Touch Screens.

Attachments:

community.element14.com/.../SCHURTER_5F00_Industrietaugliche_5F00_Touch_5F00_Screens.pdf

SCHURTER_Industrietaugliche_Touch_Screens.pdf

Tags: steuerung, ablesbarkeit, ito, extreme_bedingungen, resitive, mobile_geräte, medizintechnik, oberfläche, schurter_industrial

SCHURTER: Selection Criteria Switches

vonarbes — Fri, 08 Oct 2021 05:30:25 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:30:25 AM

High Demands Placed on Function and Product Design

Which criteria are important when selecting an operating system for devices?

"Vandal-proof input systems" have now spread to the most diverse areas of application. These operating elements are chosen for their robust nature and, increasingly, for design reasons, too. The range of products for such input systems is just as diverse as the application areas they are deployed in.

Attachments:

community.element14.com/.../SCHURTER_5F00_Selection_5F00_Criteria_5F00_Switches.pdf

SCHURTER_Selection_Criteria_Switches.pdf

Tags: piezo, ip67, ip40, schurter_industrial, metal_line

SCHURTER: Auswahlkriterien Bedientaster

vonarbes — Fri, 08 Oct 2021 05:30:24 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:30:24 AM

Hohe Ansprüche an Funktion und Produktdesign

Welche Kriterien sind wichtig bei der Auswahl des Bediensystems bei Geräten?

Der Einsatz von "vandalengeschützten Eingabesystemen" hat sich auf die unterschiedlichsten Anwendungsgebiete ausgebreitet. Neben den robusten Eigenschaften dieser Bedienelemente werden sie immer öfter auch aus Designgründen eingesetzt. Entsprechend vielfältig ist inzwischen das Sortiment für diesen Anwendungsbereich.

Attachments:

community.element14.com/.../SCHURTER_5F00_Auswahlkriterien_5F00_Bedientaster.pdf

SCHURTER_Auswahlkriterien_Bedientaster.pdf

Tags: piezo, metall_taster, schurter_industrial

SCHURTER: Safe Power Disconnection and Easy Mounting

vonarbes — Fri, 08 Oct 2021 05:30:18 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:30:18 AM

IEC Appliance Inlets with Line Switch

As energy efficiency is becoming increasingly important in the electronics industry, many efforts are made to reduce power consumption in standby mode, the most effective being, evidently, safe disconnection by means of a mechanical switch.

Attachments:

community.element14.com/.../SCHURTER_5F00_Power_5F00_Consumption.pdf

SCHURTER_Power_Consumption.pdf

Tags: mounting, depth, selectors, iec, 60320, voltage, schurter_industrial

SCHURTER: IP-Schutz von Netzsteckverbindungen in Geräten nach IEC 60529

vonarbes — Fri, 08 Oct 2021 05:30:17 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:30:17 AM

Steigende Anforderungen nach erhöhter Staub- oder Spritzwasserdichtheit

mit Staub oder Spritzwasser oder bei der Gerätereinigung zu erfüllen, müssen Geräte in vielen Anwendungen einen Schutzgrad höher als IP 40 bieten. Komponenten wie Netzsteckverbindungen nach IEC 60320, Schalter, Bedienelemente oder Anzeigeelemente, welche in sich eine erhöhte Dichtigkeit haben und eine solche auch zum Gerätegehäuse ermöglichen, erleichtern dem Konstrukteur das Design eines entsprechenden Geräts. Dies gilt für Komponenten sowohl auf der Front- wie auch auf der Rückseite der Geräte.

Um die Anforderungen der Gerätenormen sowie des täglichen Gebrauchs in rauer Umgebung

Attachments:

community.element14.com/.../SCHURTER_5F00_IP_5F00_Schutz_5F00_Auszugssicherung.pdf

SCHURTER_IP_Schutz_Auszugssicherung.pdf

Tags: messanalyse, desinfektion, ultraschallreinigungsgerät, ingress, schutz, analysegerät, absauggerät, eindringschutz, protection, infustionspumpe, schurter_industrial, gerätenormen

SCHURTER: IEC Appliance Couplers Safe, Simple and Flexible

vonarbes — Fri, 08 Oct 2021 05:30:15 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:30:15 AM

Power Supply System Selection made easy

Detachable power systems (Appliance couplers) according to IEC 60320 provide a great deal of flexibility and efficiency. Products must comply with the strictest safety agency requirements to ensure user safety, while responding to the increasing need for user-friendliness. In SCHURTER's portfolio, this product line plays a central role. Our website's "Mating Connectors" service provides support in selecting the right detachable powerconfiguration by simplifying product selection.

Attachments:

community.element14.com/.../SCHURTER_5F00_Mating_5F00_Connector.pdf

SCHURTER_Mating_Connector.pdf

Tags: distribution, entry, appliance, class, socket, connector, plug, cord, rewireable, retaining, mains, iec, 60320, inlet, protection, supply, schurter_industrial, clamp, power, unit, outlet, module

SCHURTER: IEC-Gerätesteckvorrichtungen sicher, einfach und flexibel

vonarbes — Fri, 08 Oct 2021 05:30:13 GMT

Current Revision posted to Documents by vonarbes on 10/8/2021 5:30:13 AM

Passende Stromzuführungssysteme einfach ausgewählt

Steckbare Stromzuführungen nach IEC 60320 bieten ein hohes Mass an Flexibilität und Effizienz. Gleichzeitig ist kompromisslose Sicherheit gefordert. Steckbare Stromzuführungen werden den stetig steigenden Bedürfnissen nach einfacher Bedienung und hoher Sicherheit gerecht. Für SCHURTER ist diese Produktlinie ein zentraler Bestandteil des Produktsortiments. Der Service "Mating Connectors" auf der Website bietet Unterstützung bei der Auswahl von Stromzuführungssystemen und vereinfacht die Produktselektion.

Attachments:

community.element14.com/.../SCHURTER_5F00_Ger_E400_testeckvorrichtungen.pdf

SCHURTER_Gerätesteckvorrichtungen.pdf

Tags: connectors, netzanschlussleitung, geräteeinbausteckdose, netzanschlusssteckdose, gerätesteckerkombielement, iec, 60320, mating, netzweiterverbindungsleitung, geräteanschlussstecker, schurter_industrial, geräteseckdose, auszugssicherung, schutzklasse, netzanschlussstecker, stiftemperatur, verteilleiste

Sentis-ToF - M100 3D Time-of-Flight Smart Sensor

e14 Contributor — Fri, 08 Oct 2021 05:29:01 GMT

Current Revision posted to Documents by e14 Contributor on 10/8/2021 5:29:01 AM

The Sentis^ToF - M100 is a new 3D sensor, operating on the Time-of-Flight (ToF) principle. The M100 is equipped with a PMD PhotonICs® 19k-S3 Timeof- Flight 3D chip.This smart 3D sensor delivers depth information and gray value image data for each pixel simultaneously. Therefore, it´s possible to analyze scenes based on 3D data only or in combination with 2D grayscale data. Using active IR illumination, the sensor is able to capture 3D and 2D information at a resolution of 160x120 pixels with up to 40* frames per second independently of ambient light. With a range of 3m, a field of view of 90° and a size of only 50 x 55 x 36 mm, this Ethernet connected sensor can be used for next generation sensor systems in various application fields like robotics, gesture recognition, HMI or people counting.

Further information on http://www.bluetechnix.com/goto/sentis-tof-m100

Features of the Sentis^ToF - M100
3D TECHNOLOGY	PMD ToF
PIXEL	160 x 120
FPS	up to 40*
POWER SUPPLY	24VDC @ 0.7A
Ethernet	10/100Mbit
RS432	1
RS485	1
TEMPERATURE RANGE	Industrial -40 to +85 °C
SUPPORTED OS	uClinux / VDSP++ Projext
SUPPORTED OS	Windows XP/7 (32/64bit) Linux
COOLING	passive
DIMENSIONS	B60 x H60 x T40mm W2.95“ x H2.44“ D1.06“

Attachments:

community.element14.com/.../Sentis_2D00_ToF_2D00_M100_5F00_OV.pdf	Sentis-ToF-M100_OV.pdf

Tags: smart-sensor, 3d, machine-vision, sentis, sentis-tof-m100, bluetechnix, time-of-flight, robotvision, tof, sensor

This Week In Bots: Learning Bots, Baking Bots, Gesture-Reading Bots

squadMCU — Fri, 08 Oct 2021 05:11:53 GMT

Current Revision posted to Documents by squadMCU on 10/8/2021 5:11:53 AM

Robots are ever closer to being clever enough, autonomous enough, and useful enough to actually become part of daily life. Here are the latest robo-developments.

Learning, Thinking Robot

The Tokyo Institute of Technology's Hasegawa Group has built self-organizing neural networks into the brain of a semi-humanoid android and, as a result, have given it powers that seem like science fiction. It can learn pretty much the same way we do, it learns from its mistakes too, and as it does its tasks it constantly adjusts and corrects itself until it can perfect its moves. The idea is that this kind of plasticity, the ability to deviate from a strictly programmed set of behaviors and still achieve a task, will be incredibly useful for the future of assembly-line robots--which are stuck right now if anything even slightly different happens to it while working.

www.youtube.com/watch

Gesture-Reading Robot

Qbo is a useful research robot. A team at TheCorpora has proven exactly how useful it is by teaching a Qbo to recognize hand signals, imaged by its stereoscopic cameras. In its simplest implementation they've used it to build a mobile stereo system into Qbo.

www.youtube.com/watch

It's not just for fun--there are many situations when controlling a robot by voice commands (a natural human way to interact with a device like this) isn't possible, or is computationally difficult, such as in a highly noisy environment. We can also imagine a couple of dozen military uses for this tech.

Cookie-Baking Robot

That other famous research robot, PR2, was previously programmed to help in a cooking experiment. Now, suitably protected like any young learning child with a splatter-proof outfit, PR2 has been taught to bake a cookie completely from scratch.

www.youtube.com/watch

Impressive? You bet. A hint at the future of butler bots and robot chefs? Totally.

Robots Aid Post-Quake

Paro, the robotic seal designed to soothe patients in medical establishments and provide a degree of social comfort to people in otherwise difficult circumstances (such as elderly folks in assisted living facilities) has found itself a very high-profile job indeed. In the disastrous aftermath of the Japanese earthquake and tsunami, Paro's helping residents in a retirement home near the wrecked and radiation-leaking nuclear reactors at Fukushima. Two Paros have been lent, and according to anecdotal evidence from the retirees themselves, they really do "work," being something akin to a pet.

Heart-warming as this is, the notion may disturb some of us whose lives aren't quite so influenced by robots--suggesting a future where a genuinely soul-less machine has an important social role, perhaps as a nurse in a hospital (not this one). The thing to remember is that these elderly Japanese are feeling better because of the Paro bots, and if the bots weren't there they wouldn't have been able to deal with the emotional scars.

Chat about this news with Kit Eaton on Twitter and Fast Company too.

Tags: research, military, industrial, japan, autonomous, hmi, robotics, robots, control, telepresence, robot, on_campus, behavior, cabeatwell, eavesdropper, mimic, new_technology, human_interaction, university, medical, automation, sensor, innovation, navigation

Honda's Miimo is a robot goat for your lawn

squadMCU — Fri, 08 Oct 2021 05:08:00 GMT

Current Revision posted to Documents by squadMCU on 10/8/2021 5:08:00 AM

The automaker finally commercializes its vaunted robotics know-how for home use. The Miimo will start munching grass in Europe early next year.

Over a decade after unveiling its signature humanoid robot Asimo, Honda is finally releasing a home appliance with robotics chops: an automatic lawn mower called Miimo.

The droid trims lawns several times per week, cutting only 3 millimeters (0.12 inch) of grass at a time. The clippings are small enough so that they can be left on the lawn to act as natural fertilizer, the automaker said.

Miimo mows in a random or directional pattern, staying within an electronic perimeter but using its sensors to navigate the lawn, even on sloping areas. If its bump sensors encounter an obstacle, it will stop and then set off in another direction. It will automatically devote more time to patches of long grass.

The electric mower itself produces no CO2. When its lithium-ion battery is running low, it automatically returns to its charging station.

The cutting system is made up of flexible blades that bend on impact with a hard object, ensuring they won't shatter. A fan around the blades sucks grass toward the cutting edges, providing a more even trim.

As a security feature, it will automatically shut down and sound an alarm if it's lifted off the ground while cutting; a PIN is required to restart it. This is meant to dissuade thieves and prevent injuries.

The Miimo will launch in Europe in early 2013 and will come in two models, the 300 and the 500. The latter will be able to mow a lawn up to 3,000 square meters (32,000 square feet), a lot more than the Bosch Indego autonomous mower, but far less than the Husqvarna Automower 260 ACX.

The Miimo models will be priced at 2,100 euros ($2,600) and 2,500 euros ($3,000), according to AP. They will be sold as a full-service package through Honda Lawn & Garden authorized dealers, which will install the recharging stations and offer maintenance and storage services.

Honda has been working on robotic technologies since 1986, developing industrial applications and debuting Asimo in 2000. While the humanoid is a marvel of engineering, it has never been sold and has been derided as impractical. The lawnmower, though, is a landmark in commercialization of that technology.

"Honda Miimo is the first commercial robotic product manufactured by the company for public use--representing its first step towards providing customers with robotic solutions to improve quality of life at home," the company said. Honda has a lot of catching up to do if it hopes to compete with the likes of home robot overlord iRobot. Could a Honda robot vacuum cleaner be next?

Source: CNet

Tags: japan, asimo, robots, miimo, honda, Gadget, home, news, tags:

Beer Brewing System using Freescale Kinetis MCUs [video]

GregC — Fri, 08 Oct 2021 04:50:17 GMT

Current Revision posted to Documents by GregC on 10/8/2021 4:50:17 AM

The Make It Challenge featuring Kinetis MCUs is Freescale's latest design contest.

http://www.freescale.com/kinetischallenge

This design utilizes Freescale's Kinetis K60 Tower System and FreeRTOS operating system. The craft beer industry grew 12 percent in 2010 and new operators tend come from a home brewing background. Dogfish Head brewing company was famously founded with a five-gallon system. This project explores the idea of a beer brewing appliance with the target market being home brewers and small brewpubs and restaurants. The sweet wort production process can be labor-intensive, requiring precise control of temperatures and transition times. A five-gallon home brew batch can take four to five hours to do manually with much of that waiting for water to heat up. This time and labor can be expensive for the small brewpub not reaping the benefits of economy of scale. The Kinetis Beer Brewing System automates the process from the initial filling of water to the beer being ready to be cooled and yeast added. The user only needs to add the ingredients, malt and hops, and download the recipe via the network to the system. Automating the brewing process allows the user to focus on recipe creation and benefit from the repeatability provided via precise computer control. The time freed from the manual process could be the difference in financial viability for a small scale brewer. The prototype uses cheap rapid construction to successfully test ideas on how to automate the process.

www.youtube.com/watch

For any additional information concerning Freescale solutions, please refer to Freescale Element14 dedicated section available HERE

Tags: industrial, freescale, control, kinetis, k60, motor_control, automation, freescalevideo

[2012] Line Follower Mouse

e14 Contributor — Fri, 08 Oct 2021 04:46:33 GMT

Current Revision posted to Documents by e14 Contributor on 10/8/2021 4:46:33 AM

Last half a year I spent with a group of some wonderful people. Damian Lukawski, Adam Moloniewicz and Lukasz Rojek jointed the team. They are great and they've got brilliant ideas. We have built 4 robots together. In this post we would like to present our first 4-wheels line follower.

Overall dimensions: 110 x 60 mm
Track of wheels: 105 mm
Distance between wheels and line sensors: 35 mm / 55 mm
Top speed (theoretical): 1310 cm/s
Algorithm: Intelligent double-loop cascade PID regulator
Sensor readings: analog, A/D converter

uC: STM32F207
Line sensor: TSAL5100 and TSL262R
Number of sensors: 8
Sensor pitch: 15 mm
Motor: BLDC motor Turnigy 1220
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9068
Motor driver: custom built BLDC controller
Rims and tires: form the Mini-Z cars
Gears: RB model M 0.5 42 teeth
http://rbmodel.com/index.php?action=products&group=012
Battery: Dualsky 300mAh 45C/6C 4.2V

Tags: bldc, line, follower, robot, stm, brushless, motor