ANALOG DEVICES - ADIS16405/PCBZ - BOARD, EVAL, FOR ADIS16405

RenfordNel — Sun, 17 Jun 2012 01:16:57 GMT

Current Revision posted to Documents by RenfordNel on 6/17/2012 1:16:57 AM

ANALOG DEVICES - ADIS16405/PCBZADIS16405/PCBZ - BOARD, EVAL, FOR ADIS16405/PCBZADIS16405/PCBZ | Buy Now!Buy Now!

General Description

The ADIS16405/PCBZADIS16405/PCBZ iSensor® is a complete inertial system that includes a tri-axis gyroscope, a tri-axis accelerometer, and a tri-axis mag-netometer. The ADIS16405 combines industry-leading iMEMS® technology with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for sensitivity, bias, alignment, and linear acceleration (gyroscope bias).

As a result, each sensor has its own dynamic compensation for correction formulas that provide accurate sensor measurements over a temperature range of −40°C to +85°C. The magnetometers employ a self-correction function to provide accurate bias performance over temperature as well.

The ADIS16405/PCBZADIS16405/PCBZ provides a simple, cost-effective method for integrating accurate, multi-axis inertial sensing into industrial systems, especially when compared with the complexity and investment associated with discrete designs.

All necessary motion testing and calibration are part of the produc-tion process at the factory, greatly reducing system integration time. Tight orthogonal alignment simplifies inertial frame alignment in navigation systems. An improved SPI interface and register structure provide faster data collection and configuration control. By using a compatible pinout and the same package as the ADIS1635x and ADIS1636x families, upgrading to the ADIS16405/PCBZADIS16405/PCBZ requires only firmware changes to accommodate additional sensors and register map updates.

This compact module is approximately 23 mm × 23 mm × 23 mm and provides a flexible connector interface, which enables multiple mounting orientation options.

Product Features

Tri-axis, digital gyroscope with digital range scaling
±75°/sec, ±150°/sec, ±300°/sec settings
Tri-axis, ±18 g digital accelerometer
Tri-axis, ±2.5 gauss digital magnetometer
220 ms start-up time
Factory-calibrated sensitivity, bias, and axial alignment
Calibration temperature range: −40°C to +85°C
Digitally controlled bias calibration
Digitally controlled sample rate, up to 819.2 SPS
External clock input enables sample rates up to 1200 SPS
Digitally controlled filtering
Programmable condition monitoring
Auxiliary digital input/output
Digitally activated self-test
Programmable power management
Embedded temperature sensor
SPI-compatible serial interface
Auxiliary, 12-bit ADC input and DAC output
Single-supply operation: 4.75 V to 5.25 V
2000 g shock survivability
Operating temperature range: −40°C to +105°C

Applications

Unmanned aerial vehicles
Platform control
Digital compassing
Navigation

Man Part No.	Description
ADIS16405/PCBZADIS16405/PCBZ	BOARD, EVAL, FOR ADIS16405/PCBZADIS16405/PCBZ

Tags: board, 1849514, devices, eval, for, adis16405, adis16405/pcbz, 51p3725, analog