Programmable Electronic Load - SCPI interface and Error Handling/technologies/test-and-measurement/b/blog/posts/programmable-electronic-load---scpi-interface-and-error-handlingThis blog documents focuses on the SCPI functionality of the electronic load that peteroakes , jc2048 and jancumps designed. The interface works with software that can do serial communications on a COM port.This project comes with a LABView driver anden-USTelligent Community 12RE: Programmable Electronic Load - SCPI interface and Error Handlinghttps://community.element14.com/technologies/test-and-measurement/b/blog/posts/programmable-electronic-load---scpi-interface-and-error-handlingSat, 10 Jul 2021 17:07:50 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:984e572b-d73a-40c0-8893-1431abacc20eAndrew J1<p>Hi Jan,</p><p>can I just confirm something:&nbsp; DEVelop:&nbsp; is a command very specific to your implementation?&nbsp; It seems not unreasonable to define your own SCPI commands outside the common set where they don&#39;t exist.&nbsp; I was looking for something to, say, set voltage to a raw value for a DAC (e.g. 32768) rather than a specific voltage (e.g. 2.5[v]).</p><img src="https://community.element14.com/aggbug?PostID=10022&AppID=13&AppType=Weblog&ContentType=0" width="1" height="1">