/technologies/test-and-measurement/b/blog/posts/electronic-load-part-2Hi Everyone, I am really quite busy with a lot of setting up of the lab area. I hope to place a video of my changes in the lab work layout and my equipment shelf builds. I have taken a small time out to place a video on my attempt at SPICE ...en-USTelligent Community 12https://community.element14.com/technologies/test-and-measurement/b/blog/posts/electronic-load-part-2Thu, 04 Feb 2016 21:39:17 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:7926170a-f756-446e-bfca-7a90609ea3abe14 Contributor0<p>Have used the Kikusui loads from Telonic very good spec, but not that cheap .<a class="jive-link-external-small" href="http://www.telonic.co.uk/All-Electronic-loads-s/1846.htm" rel="nofollow ugc noopener" target="_blank" title="http://www.telonic.co.uk/All-Electronic-loads-s/1846.htm">Electronic loads</a> </p><img src="https://community.element14.com/aggbug?PostID=391&AppID=13&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/technologies/test-and-measurement/b/blog/posts/electronic-load-part-2Tue, 01 Sep 2015 04:52:59 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:7926170a-f756-446e-bfca-7a90609ea3abjw07521<p>Hi Malcolm,</p><p>Thank you for the blog. I enjoyed your simulations for the load you are working on. I look forward to the video on your shop improvements.</p><p>John</p><img src="https://community.element14.com/aggbug?PostID=391&AppID=13&AppType=Weblog&ContentType=0" width="1" height="1">