/technologies/test-and-measurement/b/blog/posts/brymen-bm877-insulation-tester-reviewIntroduction Unboxing and Overview Build Quality Performance Tests and Comparison Winding Simulator Tests Motor Tests Conclusions Introduction I have been utilising the Brymen BM877 alongside the recent MetraHit Coil unit, anden-USTelligent Community 12https://community.element14.com/technologies/test-and-measurement/b/blog/posts/brymen-bm877-insulation-tester-reviewFri, 06 Dec 2019 18:54:17 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:39fbb05f-3f46-43e1-826c-3953a767390balsterr1<p>Interesting and well put together review once again. I did look at the Brymen myself but the main thing that put me off was the different input jacks for insulation and continuity tests. On most appliances i do earth bond and insulation tests at the start and finish of a repair and then resistance for checking components and as i found with the fluke it just gets tedious!!!&nbsp; Still sticking with my megger mit 400 at the moment!!!</p><img src="https://community.element14.com/aggbug?PostID=8221&AppID=13&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/technologies/test-and-measurement/b/blog/posts/brymen-bm877-insulation-tester-reviewTue, 03 Dec 2019 00:03:53 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:39fbb05f-3f46-43e1-826c-3953a767390bgenebren1<p>Another great instrument review.&nbsp; Too bad this one came up a little short on specifications (limited range).</p><img src="https://community.element14.com/aggbug?PostID=8221&AppID=13&AppType=Weblog&ContentType=0" width="1" height="1">