Agilent Technologies: U8000 Series DC Bench Power Supply

atomar — Fri, 07 Mar 2014 21:01:17 GMT

Current Revision posted to Documents by atomar on 3/7/2014 9:01:17 PM

BUY NOWBUY NOW

Technical Documents

Overview

The U8000U8000 Series with power ranging from 90 W to 150 W provides performance that is suitable for electronics manufacturing for computers and peripherals, communication systems and peripherals, aircraft/avionics systems, electronic components, and more. The U8000 Series complements the Agilent E3600 DC power supplies family to provide a wider range of power source alternatives.

The Agilent U8000U8000 Series offers 90 W to 150 W single output, non-programmable DC power supplies that include features typically found only in costly programmable supplies. The U8000 Series delivers excellent value by providing reliable DC power, effi cient setup capabilities, and important security features that let you address a variety of applications in electronics manufacturing and

educational settings.

The U8000U8000 Series has been stringently tested according to various industrial safety standards: CSA (for US and CA regulatory requirements), C-tick (Australia), and CE (Europe). The U8000 Series is fully integrated with OVP and OCP in order to prevent damage to the DUT. The security features offered in the U8000 Series prevent measurement errors and also ensure safety storage of the power supply. Security features such as keypad locking capability preclude accidental front panel usage while the physical lock mechanism provides secure instrument storage.

Key Applications: Automated test applications, ATE systems in R&D, design validation, and manufacturing.

More Resources
	More Power Supplies From Agilent		Test & Measurement Room
	Agilent Product Range		element14 Knode

Technical Documents

Learning Center

Type	Description
User Guide	Agilent: User's and Service Guide for U8001A/U8002A Single Output DC Power Supplies
User Guide	Agilent: User's Guide for U8030A Series Triple Output DC Power Supply
User Guide	Agilent: Service Guide for U8030A Series Triple Output DC Power Supply
Selection Guide	Agilent: Selection Guide for Power Products
Datasheet	Agilent: Datasheet for U8000 Series Single Output DC Power Supplies
Product Brief	Agilent: Product Brief for U8000 Series Single Output, Non-programmable DC Power Supplies
Product Brief	Agilent: Product Brief for Affordable measurement solutions for teaching and research labs
Product Brief	Agilent: Product Brief for Basic Instrumentation for Academics
Application Note	Agilent: Application Note for Overvoltage Protection in Power Supplies

Video

Video 1	Video 2
www.youtube.com/watch	www.youtube.com/watch

Features

The power supplies provide solid and reliable performance with the following features:

Excellent load and line regulation
Fast 50 μs transient response reduces test times and manufacturing cost
Low output noise of 1 mVrms, 3 mArms from 20 Hz to 20 MHz provides clean output, minimizing interference into the DUT
Over Voltage and Over Current Protection
LCD display with backlight capability
Standby output for safety purposes
Save-and-recall function up to three memory states
Security features: keypad lock and physical lock mechanism
Electrical Specifications:
- Line and Load Regulation
  - CV: <0.01% +2 mV
  - CC: <0.02% +2 mA
- Ripple and Noise (25 °C ±5 °C)
  - CV: 12 mVp-p, <1 mVrms; CC: 3 mArms
- Load Transient Response Time (within 15 mV from full load to half load and from half load to full load) : <50 μs
- Programming Accuracy1 (25 °C ±5 °C) :
  - <0.35% +20 mV
  - <0.35% +20 mA
- Readback Accuracy1 (25 °C ±5 ° C)
  - <0.35% +20 mV
  - <0.35% +20 mA
- Meter Resolution
- - Voltage: 10 mV
  - Current: 10 mA
- Maximum Output Float Voltage
  - ±240 Vdc
Protection Features
- Over Voltage Protection Accuracy ± (% of output + offset) : <0.5% +0.5 V
- Over Voltage Protection Programmable Range : 1 V to 33 V
- Over Current Protection Accuracy ± (% of output + offset) : <0.5% +0.5 A
AC Power Input Specifications
- Input Power Option (selectable)
  - 100 Vac ± 10%, 47 to 63 Hz
  - 115 Vac ± 10%, 47 to 63 Hz
  - 230 Vac ± 10%, 47 to 63 Hz
- Fuse : External, customer assessable
Physical Specifications
- Dimensions (H x W x L) : 88.1 mm x 212.3 mm x 394.3 mm

Buying Options

Model	Max. Power Output	Max. Voltage Output	Max. Current Output
U8001AU8001A	90W	30 V	3 A
U8002AU8002A	150W	30 V	5 A
U8031AU8031A	375W	30 V	6 A
U8032AU8032A	375W	60 V	3 A

Accessories

Accessories Included:

Power cord
Product reference CD-ROM
Certificate of calibration

Optional Accessories:

Accessories	MPN	Description
Accessories	U8001A-1CMU8001A-1CM	U8001AU8001A rack mount kit
	U8002A-1CMU8002A-1CM	U8002AU8002A rack mount kit
	U8001A-ABAU8001A-ABA	Users guide, service guide: English
	U8002A-ABAU8002A-ABA	Users guide, service guide: English
	E3600A-100E3600A-100	Test lead kit
	U8001A-UK6	U8001AU8001A commercial calibration with test result data
	U8002A-UK6	U8002AU8002A commercial calibration with test result data

Tags: u8001a-uk6, u8002a-aba, u8002a, u8002a-uk6, u8001a-1cm, agilent_technologies, e3600a-100, u8001a-aba, u8000, u8032a, u8031a, u8001a, u8002a-1cm