Agilent Technologies: E3600 Series Non-Programmable DC Power Supplies

atomar — Fri, 07 Mar 2014 21:01:17 GMT

Current Revision posted to Documents by atomar on 3/7/2014 9:01:17 PM

BUY NOW

Technical Documents

Overview

The E3600 Series of low-cost benchtop power supplies give you the performance of system power supplies at a decent price. All E3600 family members provide clean power with excellent regulation and a fast transient response. The E3600 Series includes single-output non-programmable models, dual-output and triple-output nonprogrammable models.

Single-output models

All E3600 Series single-output non-programmable power supplies feature separate digital-panel meters for monitoring voltage and current simultaneously, giving you precise reading and control capability. All models also feature 10-turn potentiometers for accurate adjustment of voltage and current output settings. With 0.01 percent load and line regulation, these instruments keep the output steady when power line and load changes occur.

The low normal mode noise specification of less than 200 µVrms ensures clean power for precision circuitry. In all single-output models, either the positive or negative terminal can be connected to ground, providing a positive or negative voltage output. Outputs can also be floated up to 240 V from ground. These instruments also feature adjustable current limits, letting you set the safest current limit without having to short the output.

Multiple-output nonprogrammable models

With multiple supplies in a compact unit, the E3620A and E3630A provide excellent performance while saving space on your bench. Both instruments feature a tight 0.01 percent line and load regulation and a low normal mode noise specification of less than 0.35 mV to ensure clean power for precision circuitry. With a common mode current specification of less than 1 µA, both multiple-output power supplies minimize the power line current injection.

Like the single-output models in the E3600 Series, the E3620A and E3630A feature separate digital panel meters so you can monitor the voltage and current simultaneously. They also protect your DUT against overload and short-circuit damage.

Smooth turn-on and turn-off transitions keep power spikes out of your circuits. Auto-tracking permits equal or proportional voltage sharing, and allows control of output voltage from one master unit. The master and slave supplies have the same output polarity with respect to a common bus or ground. This operation is useful where simultaneous turn-up, turndown or proportional control of all power supplies is required.

Key Applications: Automated test applications, ATE systems in R&D, design validation, and manufacturing.

More Resources
	More Power Supplies From Agilent		Test & Measurement Room
	Agilent Product Range		element14 Knode

Technical Documents

Learning Center

Type	Description
User Manual	Agilent: OPERATING AND SERVICE MANUAL FOR E361xA 60W BENCH SERIES DC POWER SUPPLIES
User Manual	Agilent: User's and OPERATING AND SERVICE MANUAL FOR MODELS E361XA 30W BENCH SERIES DC POWER SUPPLIES E3610A E3611A E3612A
User Manual	Agilent: OPERATING AND SERVICE MANUAL MODEL E3620A DUAL OUTPUT POWER SUPPLY
Datasheet	Agilent: Datasheet for E36XXA Series Non-Programmable DC Power Supplies
Product Brief	Agilent: Product Brief for Basic Instrumentation for Academics
Selection Guide	Agilent: Selection Guide for Distribution
Selection Guide	Agilent: Selection Guide for Power Products
Application Note	Agilent: Application Note for Understanding the Importance of Low-Noise Linear Power Supplies
Application Note	Agilent: Application Note for Specifying and Buying a Bench Power Supply

Video

Features

Key Features for E3600 Series:

Linear power supply
Single, dual or triple output
10-turn voltage and current control
Low noise power and excellent regulation

Key Features for E363xA Series:

Single and triple output
80 W to 200 W output power
Dual range output (except E3631AE3631A)
Low noise and excellent regulation
Remote sensing (except E3631AE3631A)
Front and rear output terminals (E3633AE3633A/E3634AE3634Aonly)
GPIB and RS-232RS-232 standard
Save and recall functions
Overvoltage protection, Overcurrent protection (except E3631AE3631A)

Key Features for E364xA Series:

Single and dual outputs
Dual range output
30 W to 100 W output power
Front and rear output terminals
Over-voltage protection
Remote Sensing
GPIB and RS-232RS-232 standard
Save and recall functions

Buying Options

Model	Max. Power Output	Max. Voltage per Output	Max. Current per Output	No. of Outputs
E3610AE3610A	30 W	15 V	3 A	1 ouput
E3611AE3611A	30 W	35 V	1.5 A	1 ouput
E3612AE3612A	30 W	120 V	0.5 A	1 output
E3614AE3614A	48 W	8 V	6 A	1 output
E3615AE3615A	60 W	20 V	3 A	1 output
E3616AE3616A	60 W	35 V	1.7 A	1 output
E3617AE3617A	60 W	60 V	1 A	1 output
E3620AE3620A	252 W	25 V	1 A	2 outputs
E3630AE3630A	15 W	20 V	2.5 A	3 outputs
E3631AE3631A	30 W	25 V	5 A	3 outputs
E3632AE3632A	120 W	30 V	7 A	1 output
E3633AE3633A	200 W	20 V	20 A	1 output
E3634AE3634A	200 W	50 V	7 A	1 output
E3640AE3640A	30 W	20 V	3 A	1 output
E3641AE3641A	30 W	60 V	0.8 A	1 output
E3642AE3642A	50 W	20 V	5 A	1 output
E3643AE3643A	50 W	60 V	1.4 A	1 output
E3644AE3644A	80 W	20 V	8 A	1 output
E3645AE3645A	80 W	60 V	2.2 A	1 output
E3646AE3646A	60 W	20 V	3 A	2 outputs
E3647AE3647A	60 W	60 V	0.8 A	2 outputs
E3648AE3648A	100 W	20 V	5 A	2 outputs
E3649AE3649A	100 W	60 V	1.4 A	2 outputs

Accessories

Accessories included:

User’s & Service guide
Product Reference CD
AC power cord

Optional Accessories:

Accessories	MPN	Description
Rackmount Kits	5061-96945061-9694	Lock-link Kit Agilent E3631A/32A/33A/34A, E3614A/15A/16A/17A/20A, E3646A/47A/48A/49A, E3640A/41A/42A/43A/44A/45A To rackmount two instruments side-by-side )
	5063-9214	Flange Kit ( Agilent E3631A/32A/33A/34A, E3646A/47A/48A/49A To rackmount two instruments side-by-side )
	5063-9240	Single Output
	5063-92435063-9243	Dual Output
	5063-92125063-9212	Flange Kit ( Agilent E3614A/15A/16A/17A/20A, E3640A/41A/42A/43A/44A/45A To rackmount two instruments side-by-side )
	5063-9256	Support Shelf (E3631A/32A/33A/34A, E3646A/47A/48A/49A To rackmount one or two instruments in a sliding support shelf)
	1494-0015	Slide Kit required for support shelf (Agilent E3631A/32A/33A/34A, E3640A/41A/42A/43A/44A/45A, E3646A/47A/48A/49A, E3614A/15A/16A/17A/20A)
	5063-9255	Support Shelf (E3640A/41A/42A/43A/44A/45A, E3614A/15A/16A/17A/20A To rackmount one or two instruments in a sliding support shelf)
	E3600A-100E3600A-100	Test Lead Kit
	5002-3999	Filter Panel for a single instrument

Tags: e3630a, e3612a, e3632a, e3616a, e3646a, e3647a, e3641a, e3649a, e3631a, agilent_technologies, e3640a, e3634a, e3600, e3633a, power_supplies, e3615a, e3643a, e3645a, e3617a, e3620a, e3642a, e3614a, e3610a, e3611a, e3644a, e3648a