AVONWOOD - EUR111K4907 - KIT, RFID, EUREKA, 125KHZ, RS232 READER

RenfordNel — Fri, 13 Apr 2012 15:13:39 GMT

Current Revision posted to Documents by RenfordNel on 4/13/2012 3:13:39 PM

AVONWOOD - EUR111K4907 - KIT, RFID, EUREKA, 125KHZ, RS232 READER

Product Overview

The Eureka 125kHz RFID starter kit - reader module version is a complete starter kit supplied with a pcb reader , cables, tags, software and manuals. This kit provides an ideal low cost introduction into low frequency (LF) RFID.

The starter kit includes a close proximity pcb reader module for reading and writing to LF passive tags. The reader module is ideal for OEM applications, pilots and trials.

The reader supports Unique read only (R/O) and Hitag-S read write (R/W) tags with typical read ranges of between 2 to 5cm using the supplied integral antenna. The reader can write to all hitag-s variants of R/W tags with the write range being typically one third of available read range.

A selection of supported LF tags are included in the kit, which include both read only and read write options.

For specific applications different antenna can be supplied to offer greater read range and positioning flexibility.

Features

The Eureka 125kHz reader module has hardware selectable TTL, RS232 and RS485 (2-Wire) communication interface options with software configurable communication parameters including the protocol and operating modes.

Firmware updates are possible via a supplied bootloader included with the evaluation software. The evaluation software allows full control of the reader commands and configuration.

The reader operates using the supplied 12V DC PSU and consumes <100mA while operating.

An open drain output allows the option to control an external device such as a sounder or led.

Subject to minimum order quantities and design specifications, Avonwood can manufacture an OEM version of the Eureka 125kHz reader module to suit your application.

Product Information

KIT, RFID, EUREKA, 125KHZ, RS232 READER
Silicon Manufacturer: Avonwood Development Ltd
Kit Contents: PCB Reader, Cables, Tags, Software and Manuals
Features: Hardware Selectable TTL, RS232 and RS485 (2-wire) Communication Interface
Core Architecture: Communication & Networking
Core Sub-Architecture: RFID Reader
Development Tool Type: Hardware / Software - RFID Starter Kit
Kit Features: Hardware Selectable TTL, RS232 and RS485 Communication Interface, Firmware Updates via Bootloader
Supported Devices: Unique (R/O), Hitag-S 32 (R/O), Hitag-S 256 (R/W) and more
Tool / Board Application: RS232 Reader
Tool / Board Applications: Eureka RFID Reader
Type: RFID Starter Kit

Man Parts No.	Description
EUR111K4907EUR111K4907	KIT, RFID, EUREKA, 125KHZ, RS232 READER
EUR111K4907EUR111K4907	KIT, RFID, EUREKA, 125KHZ, RS232 READER
EUR111K4909EUR111K4909	KIT, RFID, EUREKA, 125KHZ, USB READER
EUR211K4910EUR211K4910	KIT, RFID, EUREKA, 13.56M, RS232 READER
EUR211K4912EUR211K4912	KIT, RFID, EUREKA, 13.56MHZ, USB READER
EURUHFK4913EURUHFK4913	KIT, RFID, EUREKA, UHF, USB READER
EURUHFK4915EURUHFK4915	KIT, RFID, EUREKA, UHF, 4-PORT READER

Tags: 25r4622, 125khz, euruhfk4913, 1702042, 25r4611, reader, rfid, eur111k4909, eur211k4912, 25r4617, 1702044, 1702041, euruhfk4915, eureka, 1702043, rs232, avonwood, 1702045, kit, 25r4623, 25r4618, 1702013, eur111k4907, eur211k4910