Hi everyone, after discussing blog posts I have been informed to separate blog posts, and now have done so. My previous blog is here and provides an incite to some issues that occurred since first applying for this challenge. I have now edited my 2nd ever video blog, nerves are a bit on edge, but overall it was better than my last effort on the Raspberry Pi. This video details the project along with a brief overview of the Wireless Power Development Board. I have fortunately fixed my Audio, compared to my first video blog this is a whole lot better now. This video follows closely to the information provided in the previous blog as well
Video and Audio blogs in my opinion are the best form of learning and understanding, while text information has it place my preference is video for information. My nerves in this video show due to the fidgeting I did during the making of this. I will look at this in the future. Appreciate though my audio is fixed, I am still using low grade video cameras to capture my blogs, I suspect there are many people in my position that over time will improve. Captions I hope will be added later, not an easy task!
I have been fortunate in my system, no issue have been found and the kit is functioning well. I am very fortunate to be able to have a go at this challenge. Wurth Electronics, I think need to be more aware of the power supply, possibly source and multi national adaptor similar to others I have from Sennheiser, which can be used in almost any country.
Enjoy everyone and any comments are welcome.