Sci-Pi Design Challenge

Welcome to

See how the winners used an approved Raspberry Pi family product to help solve common problems that scientists might encounter during their experiments.

Sci-Pi Forum

Discussion

Are you ready for a scientific challenge?

886 views

3 replies

Latest over 1 year ago
by DAB

Blog - Post List

Sci-Pi Design Challenge - Winners Announcement

e14phil

I am excited to announce the winners of the Sci-Pi Design Challenge Challengers Used the Raspberry Pi 4 Model B or any other Raspberry Pi family products to take on the challenge of helping scientists solve common problems that they might e...
- 28 Jul 2023
Raspberry Pi Electronic Lab #4 - Assembly

maxpowerr

As always, I'm a little short on time to complete the project on time. Some parts are missing for final assembly. Therefore, I publish a test assembly for demonstration. {gallery}Assembly
- 30 Jun 2023
Raspberry Pi-based Experiment Logger and Analyzer with Remote Lab Control: Ready, Set, Go!

aaryan2134

Blog List: 1. Raspberry Pi-based Experiment Logger and Analyzer with Remote Lab Control 2. Raspberry Pi-based Experiment Logger: Glimpses of the Kit 3. Raspberry Pi-based Experiment Logger: Wiring up Raspberry Pi 4 B 4. Raspberry Pi-ba...
- 30 Jun 2023
Pollinator Pollster, Part 8: Summary and Conclusion

soldering.on

Pollinator Pollster (Powered by Pi) In this, the final post for this project, I would like to firstly share with you the web domain for https://pollinatorpollster.cloud/, this is the website hosted on the Raspberry Pi 4 on which you can see the data ...
- 30 Jun 2023
PiBCI - Post #7 - Summary

MarioDL99

Introduction For this project, I wanted to work on creating a device and a GUI that are fairly cheap and easy to use to conduct neuroscience projects. When I was working for my bachelor's senior design project, I was using a BCI from the lab that cos...
- 30 Jun 2023
Blog #6 Final blog

GustavoMorales

This will be a rather short blog post. In the previous one, I briefly discussed the challenges of communication. I also read a very insightful comment that I will take into account for future projects where I need to observe the behavior of microcont...
- 30 Jun 2023
Blog #5 - Pi-Sense: A Raspberry Pi-based Environmental Monitoring System for Scientific Experiments

GabrielCuaFagiani

Final product In this final blog, I would like to showcase the completed Project in a video. Thank you very much for your attention :) community.element14.com/.../Pi_2D00_Sense.mp4
- 30 Jun 2023
AI vision Reflective Telescope #3 Design and Build the Structure

fyaocn

Design and Build the Structure Table of Contents 1 Design the Reflective Telescope 2 Build the Structure 3 Run the Python Code 4 Put Together 5 Summary 1 Design the Reflective Telescope Thank for the freeware Mynewton, the design can ...
- 30 Jun 2023
Blog #4 - Pi-Sense: A Raspberry Pi-based Environmental Monitoring System for Scientific Experiments

GabrielCuaFagiani

Web Interface In this blog, I want to show you an improvement I added to my project, which is uploading sensor data to the web. I feel that having the data on the screen and the monitor connected to the Raspberry Pi is something simple, it could be d...
- 30 Jun 2023
Pollinator Pollster, Part 7: Up and Running

soldering.on

Pollinator Pollster This is going to be a technically-focused blog, walking through each major system element in the detection process, which I wanted to cover in detail now that the prototype sensor is 'live' and installed in the garden for ...
- 29 Jun 2023