Path II Programmable: Trainees Announcement

nerdyupdates USA

Design Engineer - Mechanical / Electrical Focus

Bio: Philip Kasavan is an design engineer - mechanical / electrical focus.

Interest in the training: "I have experience working with FPGAs and microcontrollers/processors separately, but I haven't had many opportunities to work on projects which combine both on one device."

Philip Kasavan's project blogs

jarios86 Spain

Computer Engineer

Bio: Antonio Rios is a computer engineer.

Interest in the training: "I am working on a deep learning accelerator for CNN and DeltaRNN, in order to develop a custom hardware to parallelize the computation of the deep learning algorithms to achieve a high computing throughput, low latency, high efficiency, and low power consumption."

Antonio Rios's project blogs

avnrdf India

Student

Bio: Avner is a student.  His Community participation has included: Design Challenges, RoadTests, blogs, discussions, and videos.

Interest in the training: "I've been interested in trying out the Ultra96 platform & the PYNQ framework, as the PYNQ overlays allow the FPGAs configuration to be swapped out on the fly using partial reconfiguration, which is great for prototyping."

Avner Fernandes's project blogs

buffteethr USA

Electrical Engineer

Bio: Cary is an Electrical Engineer with over 20 years experience designing Analog and High-Speed Digital electronics. He has experience with FPGA design and verification, C/C++, DSPs, and Arm processors.

Interest in the training: "A training program like this with deadlines will be the perfect motivation I need to get back into designing with Xilinx and getting familiar with the Vivado design tools."

Cary Smith's project blogs

cmelement14 USA

Engineer - Research & Development

Bio: Charles Mao is an engineer - research & development.

Interest in the training: "I think this training program is a perfect opportunity for me to overcome some challenges and make me comfortable with Zynq MPSoC Systems for my future job projects, such as autonomous driving, etc."

Charles Mao's project blogs

ianrj UK

Electrical Engineer

Bio: Ian Johnston is an electrical engineer.

Interest in the training: "I enjoyed FPGA related work while I was at university but, as my company is small and lacking in FPGA expertise I haven't had much chance to use or expand on these skills since I left university."

Ian Johnston's project blogs

aspork42 USA

Engineer - Research & Development

Bio: James is an engineer in Research & Development. His Community participation has included: being a Design Challenge winner, posting discussions, and blogs.

Interest in the training: "Path to Programmable 1 was my first time around with these devices. I hope to dive deeper this time. I have programmed FPGAs and PLDs at work; but just downloading the official software releases and not doing my own coding and creating IP."

James O'Gorman's project blogs

ralphjy USA

Electrical Engineer

Bio: Ralph is an electrical engineer.

Interest in the training: "I would like to learn the lower level hardware programming flow using Vivado, and I think this course would be the ideal vehicle for that.  I'd like to get more experience developing custom overlays for FPGAs."

Ralph Yamamoto's project blogs

vladrumyan UK

Electrical Engineer

Bio: Vladislav is an electrical engineer.

Interest in the training: "I am very keen to gain more knowledge and experience in working with systems that include both PL and PS. Until now, I have mostly worked with them separately."

Vladislav Rumiantsev's project blogs