Printer is here!
Well this is the Meditech printer (or what it will become in very few time, hopefully).
Hardware details
- Printing method: thermal on paper rolls 5 inches wide (about 55mm)
- Printing speed: 90 mm / min
- Power supply: 12V CC
- Communication: Bluetooth 4.0
- Printing protocol: ESC/POS standard protocol (aka EPSON protocol)
- Monochromatic graphic support
State of the art
Next step is to make it printing on the Raspberry PI 
while for now the RPI has been set with the Bluetooth support and is able to pair the printer, saw as a serial device.
Top Comments