Having built many projects incorporating servos, DJ has encountered a constant dialing problem during installation. While every project is unique, what if there was a simple standalone device capable of powering and controlling multiple servos at once while allowing custom ranges of motion? That very device will come to life in today's episode as DJ tackles his servo conundrum once and for all
Bill of Material:
| Product Name | Manufacturer | Quantity | Buy Kit |
|---|---|---|---|
| Arduino Mega | ARDUINO | 1 | Buy Now |
| TDK Lambda 5V 10A AC-DC Enclosed PSU | TDK-LAMBDA | 1 | Buy Now |
| PLA Filament | VERBATIM | 1 | Buy Now |
| Power Entry Module | CORCOM - TE CONNECTIVITY | 1 | Buy Now |
| 10K Ohm Linear Potentiometer | TT ELECTRONICS / BI TECHNOLOGIES | 4 | Buy Now |
| Rotary Encoder | BOURNS | 2 | Buy Now |
| Standard Servo | ADAFRUIT | 4 | Buy Now |
Additional Parts:
| Product Name |
|---|
| (4x) 16mm momentary push button (panel mount) |
| 2.2 inch LCD ili9340C |
| (36x) 6-32 x 1/4" screw |
DIY Four Channel Arduino Servo Tester
Top Comments