Group Actions
Engagement
  • Author Author: genebren
  • Date Created: Date Created
  • Views 1107 views
  • Likes 11 likes
  • Comments 9 comments
Related
Recommended

My first 3D prints.

genebren

Greetings,

 

I have moved one step closer to living in the modern era.  After much thinking, researching and a lot of agonizing, I bought a 3D printer.  I settled on the Monoprice Maker

Parents

  • Congratulations Gene! I have been wanting to get started with 3D printing and laser cutting for the longest time - almost as long as i have been unemployed (a very long time). I started a work practice position a couple of weeks ago at the Teknisk Museum (Technical Museum) in Oslo where they have a maker space and are in the process of creating one more because of the interest. The existing one has two UltiMaker 2, and in the new one they plan on having 16 Ultimaker 2+! They just purchased (from Farnell, by the way) 3 Raspi cameras and 3 Raspberry Pi 3 model B+ on which i have downloaded and installed an OctoPrint (Raspbian Stretch) images and configured it for Norwegian environment (character set, keyboard, ...), but without any concrete knowledge or experience with 3D printing i have requested that someone else complete the configuration for the printers. All this has peaked my interest even more, and i have been trying to learn more about it. Would have loved to get my own printer to play around with, but there is no way that is going to happen in these circumstances.

    Began by investigating the UltiMaker printers, but their prices are so far out in the realm of fantasy for me (actually, all 3D printers are) that i started investigating others - specifically the Prusa i3 MK3. Still way out there in fantasy land, but a great deal cheaper and SO NICE!!! Anyway, if you are anything like me i can imagine how happy you are to finally be able to get started with it. A new world to explore which i am sure will give your making interests a whole new dimension! Enjoy!!!

Comment

  • Congratulations Gene! I have been wanting to get started with 3D printing and laser cutting for the longest time - almost as long as i have been unemployed (a very long time). I started a work practice position a couple of weeks ago at the Teknisk Museum (Technical Museum) in Oslo where they have a maker space and are in the process of creating one more because of the interest. The existing one has two UltiMaker 2, and in the new one they plan on having 16 Ultimaker 2+! They just purchased (from Farnell, by the way) 3 Raspi cameras and 3 Raspberry Pi 3 model B+ on which i have downloaded and installed an OctoPrint (Raspbian Stretch) images and configured it for Norwegian environment (character set, keyboard, ...), but without any concrete knowledge or experience with 3D printing i have requested that someone else complete the configuration for the printers. All this has peaked my interest even more, and i have been trying to learn more about it. Would have loved to get my own printer to play around with, but there is no way that is going to happen in these circumstances.

    Began by investigating the UltiMaker printers, but their prices are so far out in the realm of fantasy for me (actually, all 3D printers are) that i started investigating others - specifically the Prusa i3 MK3. Still way out there in fantasy land, but a great deal cheaper and SO NICE!!! Anyway, if you are anything like me i can imagine how happy you are to finally be able to get started with it. A new world to explore which i am sure will give your making interests a whole new dimension! Enjoy!!!

Children
No Data