I have been having some problems with the Raspberry Pi B+, and I could really use some help, since I am supposed to train some teachers on them relatively soon. I have them listed below.
- When I use the Micro SD cards I got from Element14, I saw that they had NOOBS 1.3.8 on them. When I booted with that the USB ports were unresponsive, and I couldn't proceed with a keyboard or mouse. I formatted the card and downloaded NOOBS 1.4.0 and got it to work.
- When I booted with NOOBS 1.4.0 I got a pop up that said that Raspian would not load properly on this revision of the RPi B+.
- After getting the OS loaded successfully I tried to get a temperature probe running, and I found nothing in the /sys/bus/w1/devices folder (a problem I had earlier and solved with a kernel from Frank Buss).
- After downloading the kernel, and rebooting I got a lot of error messages during the boot and couldn't get to to the command line.
I feel like I am doing something very basic, and I don't understand the problems I am encountering, since I haven't really changed anything from the box.
If there is a resource I am missing, I would greatly appreciate it.
Thank you,
Mike Davis
