I've been invited to talk to the London Arduino meetup, about the Enchanted Cottage project where I took a traditional weather house and filled it full of electronics and 3D printed mechanical parts. The plan is to talk about how I went about the design challenge and leave any technical questions for the informal session afterwards.
It's on February 17th in the City of London.
http://www.meetup.com/LondonArduino/events/228396793/
Also talking with
• Michael Margolis - Create a connected project with the ESP8266 module
• John Nussey - Developing a connected product: the story of the Ding Smart Doorbell
