Programming PIC 16F628A

I am looking for someone in the USA who has a PIC programmer and who would be willing to put a Program that I already have on a couple of PIC16F628 chips. I will supply the program and the chips. All postage paid and reasonable installation fee.

Send me an e-mail if you are interested. johnwiltrout@att.net

Thanks John

Top Replies

Former Member over 9 years ago in reply to jw0752 +2

Here's some info on the Chipkit: ChipKIT MAX32 Development Platform
jw0752 over 8 years ago in reply to bymccay +2

Hi Brian, I found that there needed to be some termination on the crystal input when not in use. For this purpose I plug a 1 nF cap into the crystal socket. If you aren't going to use the crystal tester…
jw0752 over 9 years ago in reply to balearicdynamics +1

Hi Enrico, While experimenting with a small frequency counter kit I latched up the input on the 16F628. I ordered a couple more blank chips and found the original program on the internet but I do not have…

Parents

balearicdynamics over 9 years ago

John, is not the worth to use a Chipkit to program a PIC ? I am curious.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
jw0752 over 9 years ago in reply to balearicdynamics

Hi Enrico,
While experimenting with a small frequency counter kit I latched up the input on the 16F628. I ordered a couple more blank chips and found the original program on the internet but I do not have the programming hardware to install the program on the chip. Unless you know another way I was hoping to get it done with out buying the programmer at this time. I hope this answers your question as I did not perfectly understand it.
Thanks John
Cancel
Vote Up +1 Vote Down

Sign in to reply

Cancel
Former Member over 9 years ago in reply to jw0752

Here's some info on the Chipkit:
ChipKIT MAX32 Development Platform
Cancel
Vote Up +2 Vote Down

Sign in to reply

Cancel
jw0752 over 9 years ago in reply to Former Member

Hi Max14,
Thank you for the link with the good information on the Chipkit. I have looked it over but I do not see the connection between the ChipKit Development Platform and my need to have a PIC program installed on my PIC 16F628A uPs ICs. Perhaps you or Enrico could clue an old guy in.
Thanks John
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

jw0752 over 9 years ago in reply to Former Member

Hi Max14,
Thank you for the link with the good information on the Chipkit. I have looked it over but I do not see the connection between the ChipKit Development Platform and my need to have a PIC program installed on my PIC 16F628A uPs ICs. Perhaps you or Enrico could clue an old guy in.
Thanks John
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data