Group Actions
Engagement
  • Author Author: Fred27
  • Date Created: Date Created
  • Views 1656 views
  • Likes 0 likes
  • Comments 12 comments
Related
Recommended

On a bit of slump

Fred27

I seem to be on a bit of slump when it comes to electronics lately. Just thought I'd ask if anyone else gets this sometimes or has any suggestions how to get out of it. When I say a slump, I mean that I just haven't seemed to find the time - or to some degree the enthusiasm - to get any projects going lately.

 

There are perhaps a few reasons. I was going to mention a few things that have been a bit rough lately, but decided not to. They're probably similar to the stuff everyone's been coping with. I'm not depressed, I'm just sorta lacking the enthusiasm to get on with stuff right now. I've had depression in the past, so know how that can be. It's not that now though - I'm still in a reasonable mood most of the time and enjoy getting out to meet friends when I can, etc.

 

Anyway, it's time to get back on top of things. I almost didn't apply for the Summer of FPGA design challenge. (Not enough time. The DIY job list growing. The usual excuses.) I'm hoping this will give me a reason to kick start things.

Parents

  • Hi Fred,

     

    Between the highs of actually being inspired to build something I like to drop back and just salvage components from boards. This keeps me working with electronics. Most of the parts that I salvage are never used. I sort them and store them so I can find them again if needed. When I build a small project for my own use I always try to use the salvage parts first. This makes the salvage process a little more meaningful. I find it relaxing and almost every board has a new interesting part that usually peaks my curiosity and leads me to a small learning adventure. The source for the boards comes from junk electronic devices and I pay a routine visit to the local recycling center where I can buy an armful of boards for a couple dollars.

     

    John

Comment

  • Hi Fred,

     

    Between the highs of actually being inspired to build something I like to drop back and just salvage components from boards. This keeps me working with electronics. Most of the parts that I salvage are never used. I sort them and store them so I can find them again if needed. When I build a small project for my own use I always try to use the salvage parts first. This makes the salvage process a little more meaningful. I find it relaxing and almost every board has a new interesting part that usually peaks my curiosity and leads me to a small learning adventure. The source for the boards comes from junk electronic devices and I pay a routine visit to the local recycling center where I can buy an armful of boards for a couple dollars.

     

    John

Children
No Data