How to boundary scan the "PICOZED[7Z020]Rev.E" by use the "FTDI MPSSE[c232hm-ddhsl-0]" with VB6

Question

I have the PICOZED[7Z020] Rev.E and I need to try for connect it with FTDI MPSSE [JTAG] to VB6 for make the boundary scan. Set HIGH/LOW/TRISTATE logic to any pins. Could you advice me for start it?

narrucmot · Accepted Answer

Are you trying to write software in VB6 to develop your own JTAG programmer to configure the Zynq device on the PicoZed SOM using a FTDI MPSSE chip? If so, you will need to contact Xilinx directly about what is required. Historically, though, Xilinx does not share this information.

Let me know if I have misunderstood what you are trying to do and I can try to help you further.

--Tom