WiLink™︎ 8 Wi-Fi and BT/BLE Pmod Adaptor with xillinux

I recently brought a WiLink 8 Adaptor for my microzed board. On this page, http://microzed.org/sites/default/files/documentations/QSC-AES-PMOD-WILINK8-G-V1e-web.pdf and the software guide, there are instructions on how to install this driver on a yocto based image . But I am running xillinux OS. How do I install the drivers on this existing system on the OS instead of on the SD card boot partition?

0 100bobdxcool over 10 years ago

On this page, http://microzed.org/sites/default/files/documentations/GSG-AES-PMOD-WILINK8-G-v1_6.pdf

On page 24 of this document and appendix C, they say to mount a FAT32 mount SD card and run this command, ./microzed-wilink8-ramdisk-SDcard.sh 7010 to copy files to FAT32 partition. But, I have already have xillnux running which already has a FAT32 partition and ext4 partition. So, now with files already on the FAT32 partition, can I run ./microzed-wilink8-ramdisk-SDcard.sh 7010 without affecting the xillinux files?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel