MicroZed - how to boot from SD card

Question

Hi,
i have done a lot of reading regarding the MicroZed SD card boot but still cannot manage.

All of the information seems to be for the ZedBoard. Where could i find a boot.bin file for the MicroZed?

As i understand the boot.bin will contain the u-boot, fsbl and PL bitstream.

The getting started states the following:
Download and unzip the MicroZed_Linux_sd_image archive from www.microzed.org.

This image, however will not boot. Nothing will appear in the console.

Regards

jafoste4 · Accepted Answer

Hello Eddy, I think I may have found your problem. Refering to section four of the document I linked above : " As such, we can also eliminate UHS‐I and UHS‐II cards for booting in SD mode. It is NOT recommended to use UHS compatible cards with Zynq, as it is also not a recommended compatibility path for the SD card standard (Appendix A). " It appears the microSD card you refrenced above is UHS-I which is not reccomended to be used with ZYNQ. Please obtain another microSD card that follows the guidelines stated in the document above. Thanks, Josh