Add UART0 causes print to stdout fail

I took first set of tutorials and they functioned fine. I added UART0 to project and rebuilt. Now when I run peripheral test none of the "print"s show on the console. If I remove it they are back. Also I can't get an output on UART0 either.

Parents

0 Former Member over 10 years ago

The Uart 0 setting was the bsp setting. So now I get the console back but running the UART0 from the peripheral test gives a failure. I have tried multiple times to fix. Even ask local FE with no response.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Former Member over 10 years ago

The Uart 0 setting was the bsp setting. So now I get the console back but running the UART0 from the peripheral test gives a failure. I have tried multiple times to fix. Even ask local FE with no response.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data