I have a PicoZed SOM plugged into a PicoZed FMC Carrier Card Gen2. The wireless muRata module is plugged into JB1 and JPS1. I'm using petalinux version 2018.1. I went through the recommend driver install instructions here http://zedboard.org/content/adding-wi-fi-and-bluetooth-connectivity-zedb...
I have the following error when I boot the kernel after going through the above instructions. The orange WiFi ON LED is on.
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Freeing unused kernel memory: 1024K
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
INIT: mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (6 bytes)
version 2.88 booting
mmc1: new high speed SDIO card at address 0001
brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.bin failed with error -2
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
It looks like the WiFi module firmware isn't loading. But, I'm not sure.
Could someone give me an idea what the problem is?
I would really appreciate it.
Thanks
Kim