Can someone explain to me why JX4 does not exist in the schematic for the PicoZed? Here is the website where I pulled down the latest schematic.
http://zedboard.org/support/documentation/4736
Can someone explain to me why JX4 does not exist in the schematic for the PicoZed? Here is the website where I pulled down the latest schematic.
http://zedboard.org/support/documentation/4736
Hi there,
Where are you seeing a JX4? We only have 3 JX Connectors for PicoZed. They are Bergstack connectors JX1,JX2,JX3 and are used to connect the SOM to the carrier.
--Dan
I just realized that the schematic I have is for the PicoZed and not the PicoZed SDR. Sorry for the confusion.
Is there a website similar to the one above for the PicoZed SDR where I can pull down the latest schematics and layout?
Hi there Kiel,
There are similar websites. We are working on the information to go on the site. I have also contacted one of my team members that works on the PicoZed SDR. He is formulating a reply.
The websites are:
PicoZEd SDR SOM:
http://picozed.org/support/documentation/10511
SOM Development Kit:
http://picozed.org/support/documentation/10531
Although, as of this post, they are sparse with information.
Also, feel free to contact your local Avnet or Silica FAE. They have the ability to get you on an advanced access plan, which would get you access sooner than waiting for the public release of the documentation.
If you have further questions, feel free to ask!
--Dan
PicoZed SDR schematics are now posted on the product page - www.picozed.org/sdr
Please take note of the dedicated PicoZed SDR support forum - http://picozed.org/forums/picozed-sdr-software-defined-radio
Thanks,
Matt