Starting a application with u-boot on Microzed

Question

Hi,
I'm trying to start a RTEMS application on the Microzed Board with u-boot. The .bin file is located on the SD card. I try it the following way:
1. fatload mmc 0 0x100000 ticker.bin
2. go 100000
Than it freezes with:
## Starting application at 0x00100000 ...

When I try to bootm the image of ticker.bin with:
1. fatload mmc 0 100000 ticker.img
2. bootm 100000
it freezes with:
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   RTEMS Application
   Image Type:   ARM RTEMS Kernel Image (uncompressed)
   Data Size:    1039080 Bytes = 1014.7 KiB
   Load Address: 30000100
   Entry Point: 30000100
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
## Transferring control to RTEMS (at address 30000100) ...

I use the U-Boot 2013.01-dirty version of u-boot. RTEMS is a bare metal application

Regards

arturete · Accepted Answer

All the setup was ok. I created the FSBL.elf and the BOOT.bin with the SDK, as you indicated me in the last comment, instead of the terminal. It started working when I used the hello.ralf file instead of the hello.exe, and I renamed it to hello.elf. I putted those files plus the .bit in the SD and the application is launched and works. As you told me for the next issues I will use the Digilent forum. THANKS, Arturete.