avnet ultra96 onsemi dual mipi camera datasheets

Just a couple of questions:

1.Has the AP1302 datasheet become available?

2.What about AR1335?

How would one go to implement a baremetal design without these. I would prefer to design a PYNQ package for this card as there is none available at the moment.

Top Replies

dimiterk over 4 years ago in reply to ctammann +1

Hi, I read your articles and I can recreate the HW design but there is no info on the image co-processor apart from a kernel driver. I wanted to access the image streams for each camera separately. Basically…

ctammann over 4 years ago

Hi, so the datasheets for these devices are only available under NDA. If you'd like to direct message me I can get you in touch with the right people to request them. For the 1335 because of the resolution increase over the 0144 only a single camera is supported on the mezzanine. The hardware design without petalinux is posted to our github repository, check out this blog I put together on building that design and let me know if that is helpful - https://www.element14.com/community/groups/fpga-group/blog/2020/12/16/ultra96-v2-on-semiconductor-dual-camera-mezzanine-…
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
dimiterk over 4 years ago in reply to ctammann

Hi,

I read your articles and I can recreate the HW design but there is no info on the image co-processor apart from a kernel driver.
I wanted to access the image streams for each camera separately.

Basically I'm interested implementing a baremetal solution and a PYNQ package if possible for the road test. I can sign an NDA and release the driver as an array with magic numbers.
Also, on the schematics the LS and HS connectors text are flipped.
Cancel
Vote Up +1 Vote Down

Sign in to reply

Cancel