Is power management possible on Ultrazed-EG?

Question

We are looking for a hardware platform to prototype power management on Zynq.

We need the hardware to be started with only Low-Power Domain and PS MIO powered on Zynq with the ability to turn of Full-Power and Programming Logic power domains later under software control. Is this possible on Ultrazed-EG?

jafoste4 · Accepted Answer

Hello Gouthamp, We do not recommend altering any of the MPSoC voltage rails. Any attempt to change the MPSoC voltage rails will void your warranty. If you insist on going foward with this, you will need to contact Infineon to get the PMBus dongle and programming software. --Josh