In section 2.9.2 of the HW manual it states that "JE1, connects to the PS-side on MIO pins [7,9-15]". In table 16 it shows JE7 going to G6 which is MIO 0. Should this read 0,9-15 or am I missing something?
Thanks
Steve
In section 2.9.2 of the HW manual it states that "JE1, connects to the PS-side on MIO pins [7,9-15]". In table 16 it shows JE7 going to G6 which is MIO 0. Should this read 0,9-15 or am I missing something?
Thanks
Steve
