How to reset ZED board

HI

how to reset the zed board.

i am having two zed boards,in that first one is working properly and second one is not working properly when i booting from boot.bin file .

please any one know the issue about how to reset the zed board.

thank you

Parents

0 Former Member over 9 years ago

If the mode jumpers were not set for SD card booting, the board would function as you describe. Also, a JTAG connection would override the jumper setting and the board would indeed boot. Sorry, you may have already verified this, but the symptoms really point to an error in the mode setting. Can you verify the following jumper settings for Zedboard SD boot on your non-working board:
MI02, MI03 MI06: Jumpers between SIG and GND
MI04 and MI05: Jumpers between SIG and 3V3
Ron
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Former Member over 9 years ago

If the mode jumpers were not set for SD card booting, the board would function as you describe. Also, a JTAG connection would override the jumper setting and the board would indeed boot. Sorry, you may have already verified this, but the symptoms really point to an error in the mode setting. Can you verify the following jumper settings for Zedboard SD boot on your non-working board:
MI02, MI03 MI06: Jumpers between SIG and GND
MI04 and MI05: Jumpers between SIG and 3V3
Ron
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 Former Member over 9 years ago in reply to Former Member

We have set our zed board to the above mentioned jumper settings. Our boot file which is there on the SD card is functioning on another Zedboard but not on the board which we have in our company.The zedboard is not able to communicate with the SD card since the time we selected Xilinx tools --> program FPGA. The done blue LED illuminated when the helloworld.bit file which we created on our own and downloaded. However when we tried to boot from SD card, it doesn't illuminate and what we feel is that the connection between the SD card and the zed board might be faulty. we are very new to zedboard and do not even know how to establish communication between sd card and zed board through JTAG boot. please guide us.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 9 years ago in reply to Former Member

Is this the same SD card that works on a different ZedBoard, or just the same image on a different SD card? If this specific card has not been verified in a second zedboard, you might simply try using a different SD card to boot. It is not uncommon for SD cards to fail.
Ron
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 9 years ago in reply to Former Member

They tried with another memory card also by booting from .bin file but that zed board is not booting from sd card
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel