Actions
Forum Thread Details
  • Locked Locked
  • Replies 11 replies
  • Subscribers 88 subscribers
  • Views 1638 views
  • Users 0 members are here
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Top layer pad with hole

ffb.boy.30

Hi,

I've an old Altium (2016) and I would like to create a top layer pad with a hole.

Actually, when I create a top layer pad the hole disappear.

My goal is to create a 0.8mm pad with a hole of 0.4mm.

The bottom of my pcb will be in contact with metal that why I don't want to use multilayer pad

Thanks for your help

Parents

  • Not all PCB manufacturers will necessarily do this feature cheaply or cleanly. So I'd first advise that you find another engineering solution.

    If it is necessary, I'd advise checking to ensure that "Automatically remove loops" is turned off in File > System Preferences: PCB Editor > Interactive Routing. Electrically unnecessary vias and traces usually get deleted by CS when this feature is enabled.

Reply

  • Not all PCB manufacturers will necessarily do this feature cheaply or cleanly. So I'd first advise that you find another engineering solution.

    If it is necessary, I'd advise checking to ensure that "Automatically remove loops" is turned off in File > System Preferences: PCB Editor > Interactive Routing. Electrically unnecessary vias and traces usually get deleted by CS when this feature is enabled.

Children
No Data