Actions
Forum Thread Details
  • Locked Locked
  • Replies 4 replies
  • Subscribers 88 subscribers
  • Views 2129 views
  • Users 0 members are here
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Manual or Automatic net/wire class net color

jlcms

Hello,

 

On circuitstudio website there is a sample of a schematic:

image

VCC and GND net/wire have both a special color and width.

Is there a way to have those attribute automatic?

Parents

  • Hi Jean-Louis,

    You may already know this and it's not automatic but you can do the following to add colors to wires in the schematic:

    1. Right click on the wire you would like to edit
    2. Select "Properties" at the bottom of the window
    3. Select your color/width preferences

     

    It doesn't appear that net classes/or nets in general have an automatic coloring scheme for connected wires.  There may be some funky workaround but I haven't messed with it enough to try and figure one out.  Hopefully someone from the CIrcuitStudio team can comment.

Reply

  • Hi Jean-Louis,

    You may already know this and it's not automatic but you can do the following to add colors to wires in the schematic:

    1. Right click on the wire you would like to edit
    2. Select "Properties" at the bottom of the window
    3. Select your color/width preferences

     

    It doesn't appear that net classes/or nets in general have an automatic coloring scheme for connected wires.  There may be some funky workaround but I haven't messed with it enough to try and figure one out.  Hopefully someone from the CIrcuitStudio team can comment.

Children
No Data