Actions
Forum Thread Details
  • Replies 112 replies
  • Subscribers 24 subscribers
  • Views 8812 views
  • Users 0 members are here
Related

Need technical help from Microchip? Ask our Expert!

nlarson

This thread has been closed to new questions.

However, we welcome you to Post Your Question about Embedded in the element14 Community Embedded group. You'll find many fellow members and experts who have just the answer you're looking to find! 

 

Thank You, Your Friends at element14 Community

MikeMcGlade

Mike McGlade

Mike has 16 years of experience with Microchip products including MCU, Memory & Analog.  He also has significant knowledge of lighting, safety & security and vending industries.

 


Parents

  • Hey Mike.

     

    My friend and I recently bought an NXP-LPC1313FBD48 and an FTDI TTL-232R-3v3 cable(part 34M887

    ) and we were wondering:

     

    1. What pinss on the MCU we would connect the cable to.

    2. How we could connect the ports of the MCU to the cable (because it looks like the ports on the cable are too big for the pins on the MCU)

    3. Could we use the Flashmagic software to do this and if so what is the baud rate and the Xtal frequency of the MCU?

     

    Thanks

  • in reply to Former Member

    Hi Jack,

     

    This forum is dedicated to MICROCHIP products only...If you want support for NXP-LPC1313FBD4, you should go to the website of the maker of this product.

     

    If you use a Microchip 32 bits (PIC32MX) or any other MICROCHIP device, you can get support on this website ;=)

     

    Regards

Reply Children
No Data