cannot program my MCU

Question

I´ve developed a program for a RS08KA2 with a DEMO9RS08KA2DEMO9RS08KA2 board Now I want to program my MCU on the real board(BDM connector and this is a RS08KA1 I´ve recompiled the code for the new MCU In first place I tried the demo board to program the MCU but I get the error"The selected device differs that of the target Choose another device

I supposed that the DEMO9RS08KA2DEMO9RS08KA2 is not compatible with the KA1 so I bought a programmer(USBSpyder but I get the same error Where is the problem

Thanks for your help.

AlexLuFarnell · Accepted Answer

The message indicates an incompatibility between the .abs and the processor you are targeting.

You may need a support engineer to get a look at that.

I would recommend you to submit a service request for that.

Click here to submit a service request.

Make sure to attach a reproducible project and installed product information to the service request.
To generate the required information:
- Start CodeWarrior
- Open the project
- Select "Help" -> "Pack and Go" and follow instructions on the screen.

Attach the generated .zip file to the SR.

Alex