Help me to setup the software to use the trimak motor

manojroy123 2 months ago

I am trying to install TMCL-IDE for windows. I am getting this error. Please help me in solving it.

Top Replies

cstanton 1 month ago in reply to manneveru +3

manneveru said: This is not right forum for this post This post is relating to a RoadTest and its consequent review, it's the correct place for it to be situated. You can turn off replies to the thread…
Jan Cumps 1 month ago in reply to manojroy123 +2

Manoj, it may help if you: use the correct name in the subject. Shows respect to the manufacturer that sponsored the board explain what step you are trying to complete in the user guide/documentation…
beacon_dave 2 months ago in reply to manojroy123 +1

https://www.analog.com/media/en/technical-documentation/user-guides/how-to-start-linux-tmcl-ide.pdf

Parents

manojroy123 1 month ago

How to solve the error in red label.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
beacon_dave 1 month ago in reply to manojroy123

https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/tmc9660-3ph-evkit.html#eb-gettingstarted

https://github.com/analogdevicesinc/TMC-EvalSystem/releases?page=1

Looks like you may have old firmware on the Landungsbruecke board that does not support the current TMC9660-3PH-EVAL board

as it only appears to have been included since the v3.10.5 firmware

How can I update the firmware of a Trinamic product?
https://ez.analog.com/motor-control-hardware-platforms2/w/documents/18637/how-can-i-update-the-firmware-of-a-trinamic-product

This looks like progress on the TMCL-IDE communications side though:
Cancel
Vote Up +1 Vote Down

Sign in to reply

Cancel

Reply

beacon_dave 1 month ago in reply to manojroy123

https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/tmc9660-3ph-evkit.html#eb-gettingstarted

https://github.com/analogdevicesinc/TMC-EvalSystem/releases?page=1

Looks like you may have old firmware on the Landungsbruecke board that does not support the current TMC9660-3PH-EVAL board

as it only appears to have been included since the v3.10.5 firmware

How can I update the firmware of a Trinamic product?
https://ez.analog.com/motor-control-hardware-platforms2/w/documents/18637/how-can-i-update-the-firmware-of-a-trinamic-product

This looks like progress on the TMCL-IDE communications side though:
Cancel
Vote Up +1 Vote Down

Sign in to reply

Cancel

Children

manojroy123 1 month ago in reply to beacon_dave

I have updated the firmware with LandungsbrueckeV3_v3.10.5_BL.hex but it is still not working. But it is not showing any error.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
manojroy123 1 month ago in reply to beacon_dave

Please help me in solving this error.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
cstanton 1 month ago in reply to manojroy123
Hi Manoj,

It looks like you’re hitting roadblocks at each step and immediately asking for the fix. That slows things down because the community can’t see what you’ve already tried, and it doesn’t help you build confidence in solving problems yourself.

Here’s a better way forward:

1. Work through the official resources first

TMCL-IDE software download & docs:
https://www.analog.com/en/resources/evaluation-hardware-and-software/motor-motion-control-software/tmcl-ide.html

TMCL-IDE on Linux – setup guide:
https://www.analog.com/media/en/technical-documentation/user-guides/how-to-start-linux-tmcl-ide.pdf

TMC9660-3PH Evaluation Kit page (with getting started guide):
https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/tmc9660-3ph-evkit.html

Evaluation System (software + drivers + updates):
https://github.com/analogdevicesinc/TMC-EvalSystem/releases

2. Apply structured troubleshooting

Check your OS version against the requirements in the docs. (You've done most of this already)

Note the exact error messages (copy them and paste them in, don’t just post screenshots, especially where cropped).

Try the documented steps for your OS before asking.

3. When you ask for help

State the product and version (board, TMCL-IDE version, OS, hardware if you're using anything additional).

Show what you tried, and the result.

Ask a focused question (e.g. “The Linux guide says to install dependency X, I did that but now I see error Y. What should I check next?”).

The community is happy to support you, but you’ll make faster progress if you use these resources first and show what you’ve learned when you come back.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
manojroy123 1 month ago in reply to cstanton

Ok, thanks. Let me check the solution you provided. I think it should solve most of the problem I am facing.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
beacon_dave 1 month ago in reply to manojroy123

Perhaps try the latest version ( 3.11.3 ) as the release notes show there were more bug fixes after the initial release for the TMC9660.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel