I discovered in the Arduino Forum that the Media Carrier Line Out on the Ventuno Q is Unbalanced Mono. It is Balanced (differential) Mono on The Uno Q.
I thought this might be of interest to the Roadtesters (pandoramc ,salmanfarisvp , geralds , vmate ) for the Test AI-controlled Robotics Actuation on the Arduino VENTUNO Q! Roadtest. I think I missed that somewhere in the documentation.
I verified by looking at Page 63 of the Ventuno Q schematic that LINEOUT_M is disconnected from the MAX98091 and connected to ground. So, the behavior of the Carrier board is different based on which board it is plugged into. I'll need to verify this when I get the roadtest hardware. I wonder if anything else is different on the expansion connectors - they are certainly using different ICs on the boards.



