Will this BMS design work?

I have been working on this design for the past month or so but i am unsure if it will work, so I am wondering if anyone can point out any mistakes I made in the design.

I based my design on the Analog Devices DC2259A

EDIT: added design and link

Message was edited by: Mason Rollins

Attachments:

Slave Rev10c.pdf

Top Replies

Jan Cumps over 6 years ago in reply to fmilburn +3

This is the corrected link: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/dc2259a.html#
michaelkellett over 6 years ago +3

It's not possible to review a design of this complexity without putting in serious effort - you might get lucky and find some one who has done a similar thing before and will review your design for free…
fmilburn over 6 years ago +1

Unfortunately your design schematic did not get attached. In addition you should post the origin / basis for your design, the design objectives, and more detail on what your concerns are.

Parents

fmilburn over 6 years ago

The link to Analog devices in your post is not good. The schematic uses the LTC6811 and the datasheet has a lot of applications information. I am not familiar with this part so won’t comment further but to get good help you should describe your application, where you got the schematic and what if anything was changed, and if there are specific things that concern you.

Frank
Cancel
Vote Up +1 Vote Down

Sign in to reply

Cancel
Jan Cumps over 6 years ago in reply to fmilburn

This is the corrected link: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/dc2259a.html#
Cancel
Vote Up +3 Vote Down

Sign in to reply

Cancel

Reply

Jan Cumps over 6 years ago in reply to fmilburn

This is the corrected link: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/dc2259a.html#
Cancel
Vote Up +3 Vote Down

Sign in to reply

Cancel

Children

No Data