Hi,
Recently we purchased one devkit from element 14 of STM32 F4 Discovery and i want to know the connection for the lcd is in RGB mode or I2C.
Attached is the link for development board for reference.
Thanks in advance
Thanks,
Amit Jain
Hi,
Recently we purchased one devkit from element 14 of STM32 F4 Discovery and i want to know the connection for the lcd is in RGB mode or I2C.
Attached is the link for development board for reference.
Thanks in advance
Thanks,
Amit Jain
The display is driven using the RGB protocol. 32F429IDISCOVERY Discovery kit for STM32 F429/439 lines - with STM32F429ZI MCU - STMicroelectronics, scroll down, open the "Discovery kit for STM32F429/439 lines" .pdf document.
The display is driven using the RGB protocol. 32F429IDISCOVERY Discovery kit for STM32 F429/439 lines - with STM32F429ZI MCU - STMicroelectronics, scroll down, open the "Discovery kit for STM32F429/439 lines" .pdf document.
Thanks for your response. We have some doubts that are Why Vsync,Hysnc and Data enable pins of MCU are connected to 3V3 when it is meant for RGB protocall.
Thanks,
Amit Jain