Is it possible to access GPIO on Android?

I'm designing my next project, and was wondering if it's possible to access GPIO on an Android tablet. I know you can do this on a PC using a breakout board like the Adafruit FT232H. Is there something similar I can use with an Android tablet?

Parents

0 shabaz 5 months ago

You can; many USB UART chips have spare GPIO, you usually need Android software from the manufacturer to support it.

For example, if you use a USB UART chip from Cypress/Infineon, then the Android SDK is downloadable here:

https://www.infineon.com/cms/en/product/universal-serial-bus/usb-2.0-peripheral-controllers/ez-usb-serial-bridge-controller/cy7c65213-28pvxi/?redirId=231691

However, if you're a beginner with Android, personally I would simply use USB serial, or WiFi or Bluetooth, to (say) a Pi Pico, and control the GPIO from that. The reason is, it is very easy to (say) use the network or Bluetooth from many programming languages, whatever you're familiar with, so that you don't need to work low-level with an SDK.

Example: it's easy to control things using BLE, using a web page (which works with not just Android, but also iPhones etc, Linux, Windows, etc.. not restricted to Android.

If you're a beginner, I'd suggest investigating how to use a Pi Pico, and then control that from your tablet, using the interface of your choice (USB serial, WiFi or BLE, if you use the Pico-W variant).
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 shabaz 5 months ago

You can; many USB UART chips have spare GPIO, you usually need Android software from the manufacturer to support it.

For example, if you use a USB UART chip from Cypress/Infineon, then the Android SDK is downloadable here:

https://www.infineon.com/cms/en/product/universal-serial-bus/usb-2.0-peripheral-controllers/ez-usb-serial-bridge-controller/cy7c65213-28pvxi/?redirId=231691

However, if you're a beginner with Android, personally I would simply use USB serial, or WiFi or Bluetooth, to (say) a Pi Pico, and control the GPIO from that. The reason is, it is very easy to (say) use the network or Bluetooth from many programming languages, whatever you're familiar with, so that you don't need to work low-level with an SDK.

Example: it's easy to control things using BLE, using a web page (which works with not just Android, but also iPhones etc, Linux, Windows, etc.. not restricted to Android.

If you're a beginner, I'd suggest investigating how to use a Pi Pico, and then control that from your tablet, using the interface of your choice (USB serial, WiFi or BLE, if you use the Pico-W variant).
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data