Have a question about radio or wireless communication?  Ask me!

We are an R &D group ARGEBILISIM established in Turkey ,working for a new project for our company which consisits of collecting UART data from end devices stations using Jennic wireless technology .Here is Joined our network sheme , we are making our tests on JN 5148 module via AN 1061,  we would like to ask your advice as network- jennic- jennet professionals  :

-Does joined nodes end devices or routers should send automaticly their data to coordinator when they have data, is it  like CR already  scans its children joined automaticly one by one?  or  should we add in our program a scanning algorithm for reading one by one joined children if they have data so that all nodes don't send on same time their data to avoid loosing some of them, they will be given each one like its turn for sending its data,so that in one time  only one end device is communicating with coordinator?

-If we have to make our scaning all devices method for collecting one by one node data to cr : how to extract the list of nodes that joined our cr : or our asscoiated network autorised nodes (all their  64 bits adresses)?

Can you give us advises about jennic network CR and  ED global idea of how should be collecting data done via wireless for  safe trustable and fast ways of collecting data from end device stations,we could not find any suitable and understandable answers from forums or documetations.

Thanks in advance

DOUMANDJI.s
Electronic Engineer
www.argebilisim.com

We are an R &D group ARGEBILISIM established in Turkey ,working for a new project for our company which consisits of collecting UART data from end devices stations using Jennic wireless technology .Here is Joined our network sheme , we are making our tests on JN 5148 module via AN 1061,  we would like to ask your advice as network- jennic- jennet professionals  :

-Does joined nodes end devices or routers should send automaticly their data to coordinator when they have data, is it  like CR already  scans its children joined automaticly one by one?  or  should we add in our program a scanning algorithm for reading one by one joined children if they have data so that all nodes don't send on same time their data to avoid loosing some of them, they will be given each one like its turn for sending its data,so that in one time  only one end device is communicating with coordinator?

-If we have to make our scaning all devices method for collecting one by one node data to cr : how to extract the list of nodes that joined our cr : or our asscoiated network autorised nodes (all their  64 bits adresses)?

Can you give us advises about jennic network CR and  ED global idea of how should be collecting data done via wireless for  safe trustable and fast ways of collecting data from end device stations,we could not find any suitable and understandable answers from forums or documetations.

Thanks in advance

DOUMANDJI.s
Electronic Engineer
www.argebilisim.com

Hello Doumandji,

Sorry for not replying earlier.  Had some issue with email.

I worked on a number of projects involving 100's of nodes and this can become complicated depending on the requirement of your system.

I will need to look at your requirements a little more.  Please email me directly with your questions.

www.pinterec.ca