Hello, i've been trying to fix this, but i ended up with this 
Should i just give up or does it look poosible?
I've tried desoldering braid.
Thanks in advance
Attachments:
 |
Be sure to click 'more' and select 'suggest as answer'!
If you're the thread creator, be sure to click 'more' then 'Verify as Answer'!
Hello, i've been trying to fix this, but i ended up with this
Should i just give up or does it look poosible?
I've tried desoldering braid.
Thanks in advance
|
I think the pcb is burned, so no use in those pins.
I've also thought of a way to get around the problem anyways 
I've only damaged the power pins and not the data pins, so if i really wanted to, i could get power externally.
Thanks for the advice, i will give it some more tries 
I can't tell about the PCB(burnt or not) but you are absolutely right about the other way to power up things. But don't really use any external power, you do need to find the way to power things (HDD or DVD-ROM's etc) connected to that Sata port from that motherboard itself. Otherwise, there might be ground issues.
Good Luck 
I can't tell about the PCB(burnt or not) but you are absolutely right about the other way to power up things. But don't really use any external power, you do need to find the way to power things (HDD or DVD-ROM's etc) connected to that Sata port from that motherboard itself. Otherwise, there might be ground issues.
Good Luck
