Actions
Forum Thread Details
  • State Not Answered
  • Replies 18 replies
  • Subscribers 305 subscribers
  • Views 1755 views
  • Users 0 members are here
Related
See a helpful answer?

Be sure to click 'more' and select 'suggest as answer'!

If you're the thread creator, be sure to click 'more' then 'Verify as Answer'!

Connector identity

Former Member

Can anyone advise on this connector on my print finishing equipment. I managed to break in whilst moving premises at the weekend.

 

Its 28pins, two rows on ten with a row of eight between them.

 

Thanks

 

Trev.

Attachments:
image
image
Parents
  • 0

    Trev, I checked the Digi-Key catalog and was unable to find a matching connector. Unfortunately it is a very old connector style. I think Andy found the right one. I created a part number from his data sheet: P-1328-CE for the 1300 Series or P-1628A-C for the 1600 Series. All I could find were more data sheets. Usually when I Google a part number, I get places that sell them. We have a local electronics store in Costa Mesa, CA, USA called MarVac. they usually stock lots of old parts. I have sent them the 2 images you posted and the specifications on # of pins, etc. Could you provide the length and width of the Bakealite(green) part of the connector. I'll post again when I get an answer.

    Regards,

    Steve

Reply
  • 0

    Trev, I checked the Digi-Key catalog and was unable to find a matching connector. Unfortunately it is a very old connector style. I think Andy found the right one. I created a part number from his data sheet: P-1328-CE for the 1300 Series or P-1628A-C for the 1600 Series. All I could find were more data sheets. Usually when I Google a part number, I get places that sell them. We have a local electronics store in Costa Mesa, CA, USA called MarVac. they usually stock lots of old parts. I have sent them the 2 images you posted and the specifications on # of pins, etc. Could you provide the length and width of the Bakealite(green) part of the connector. I'll post again when I get an answer.

    Regards,

    Steve

Children