What info do I need to order these resistors?
Be sure to click 'more' and select 'suggest as answer'!
If you're the thread creator, be sure to click 'more' then 'Verify as Answer'!
This <<<<<<<looks to me to be what i would use to replace them with,:
I may be wrong with the conversion, but they should be correct.
How i would do it is, solder the new resister onto the old axel leads, than after everything is soldered,
snip the old resistor off. that way you wont bother the traces hopefully.
I have learned this from experience, the hard way.
Using the old resistor as a sort of heat sink until you are done.
I hope this helped.
I ordered 250, dose the size deference seem right? How do I know what watt the old resistors are rated?The old ones read 2.20K and the new ones read 2.18K, I guess that is good but I'm worried about the watt rating.
I ordered 250, dose the size deference seem right? How do I know what watt the old resistors are rated?The old ones read 2.20K and the new ones read 2.18K, I guess that is good but I'm worried about the watt rating.
